Anycubic Kobra 2 Max vs Anycubic Kobra S1 ACE 2 Pro Combo
Head-to-head 3D printer comparison, 2026
Choosing between two Anycubic printers? The Anycubic Kobra 2 Max ($399) and Anycubic Kobra S1 ACE 2 Pro Combo ($499) both come from one of the most trusted names in 3D printing, with a $100 gap between them. Here's how they compare across every category that matters.
Our Verdict
The Anycubic Kobra S1 ACE 2 Pro Combo takes the crown with 8/10 vs 7/10. It pulls ahead in Beginner Friendliness, Print Quality, Speed. That said, the Anycubic Kobra 2 Max saves you $100.
Score Breakdown
Specifications
| Spec | Anycubic Kobra 2 Max | Anycubic Kobra S1 ACE 2 Pro Combo |
|---|---|---|
| Price | $399 | $499 |
| Type | FDM | FDM |
| Build Volume | 420 x 420 x 500 mm | 250 x 250 x 250 mm |
| Print Speed | 500 mm/s | 600 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 20.5 kg | 13 kg |
| Overall Score | 7/10 | 8/10 |
Pros & Cons
Anycubic Kobra 2 Max
+420x420x500mm for $399 is the largest bed you'll find at this budget
+Direct drive at this scale handles flexible filament when needed
+WiFi means you're not walking over with a USB stick for every job
−Open frame on a 420mm heated bed means serious adhesion prep is mandatory
−Full bed heating at this size takes 10+ minutes to reach temp
−Discontinued: Anycubic no longer supports this model
Anycubic Kobra S1 ACE 2 Pro Combo
+16 colors out of the box — doubles the 8-color S1 Combo and quadruples the Bambu A1 Combo (4)
+Fully enclosed CoreXY handles ABS, ASA, and engineering filaments without warping
+44dB quiet mode is unusually low for a 600mm/s CoreXY — apartment-friendly
+Upgraded hotend is rated for the full Anycubic filament range
+Early bird €459 undercuts the Bambu P2S (€549) and matches pricing of the older 8-color S1 Combo
−Brand new product — early adopter risk on firmware and ACE 2 Pro reliability
−Anycubic slicer still trails Bambu Studio on automation and profile polish
−ACE 2 Pro adds significant desk footprint
−Early bird pricing ends May 31 — regular price expected to climb
Who Should Buy Which?
Choose the Anycubic Kobra 2 Max if you want:
- A great printer for large-prints
- A great printer for cosplay
- A great printer for budget
- 420x420x500mm build
- Auto bed leveling
- Direct drive
Choose the Anycubic Kobra S1 ACE 2 Pro Combo if you want:
- A great printer for multi-color
- A great printer for speed
- A great printer for enclosed
- ACE 2 Pro multi-color system (up to 16 colors)
- Fully-enclosed CoreXY architecture
- Upgraded hotend (all-filament compatible)
Frequently Asked Questions
Is the Anycubic Kobra 2 Max better than the Anycubic Kobra S1 ACE 2 Pro Combo?
By the numbers, the Anycubic Kobra S1 ACE 2 Pro Combo scores higher (8/10). But "better" depends on your use case, the Anycubic Kobra 2 Max may be the smarter buy if you need large-prints.
Which is better for beginners, Anycubic Kobra 2 Max or Anycubic Kobra S1 ACE 2 Pro Combo?
The Anycubic Kobra S1 ACE 2 Pro Combo is more beginner-friendly (7/10 vs 5/10) with easier setup and a gentler learning curve.
Is the Anycubic Kobra S1 ACE 2 Pro Combo worth $100 more than the Anycubic Kobra 2 Max?
The Anycubic Kobra S1 ACE 2 Pro Combo scores higher overall (8/10 vs 7/10). The extra $100 gets you 16 colors out of the box — doubles the 8-color s1 combo and quadruples the bambu a1 combo (4).
What's the main difference between Anycubic Kobra 2 Max and Anycubic Kobra S1 ACE 2 Pro Combo?
Build volume (420x420x500mm vs 250x250x250mm) and print speed (500 vs 600 mm/s). The Anycubic Kobra 2 Max is best for large-prints; the Anycubic Kobra S1 ACE 2 Pro Combo targets multi-color.