Anycubic Kobra 2 Max vs Artillery Sidewinder X4 Plus
Head-to-head 3D printer comparison, 2026
The Anycubic Kobra 2 Max and Artillery Sidewinder X4 Plus are both FDM 3D printers competing in the same price bracket, $399 vs $349. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Artillery Sidewinder X4 Plus takes the crown with 7.4/10 vs 7/10. It pulls ahead in Beginner Friendliness, Speed.
Score Breakdown
Specifications
| Spec | Anycubic Kobra 2 Max | Artillery Sidewinder X4 Plus |
|---|---|---|
| Price | $399 | $349 |
| Type | FDM | FDM |
| Build Volume | 420 x 420 x 500 mm | 300 x 300 x 400 mm |
| Print Speed | 500 mm/s | 500 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 20.5 kg | 14.5 kg |
| Overall Score | 7/10 | 7.4/10 |
Pros & Cons
Anycubic Kobra 2 Max
+420x420x500mm for $399 is the largest bed you'll find at this budget
+Direct drive at this scale handles flexible filament when needed
+WiFi means you're not walking over with a USB stick for every job
−Open frame on a 420mm heated bed means serious adhesion prep is mandatory
−Full bed heating at this size takes 10+ minutes to reach temp
−Discontinued: Anycubic no longer supports this model
Artillery Sidewinder X4 Plus
+300x300x400mm at $349: the price-per-cubic-millimeter is absurd
+Klipper pre-installed with room to tune
+Direct drive handles TPU and flexible materials at this large scale
+Prints armor plates and large props without slicing and gluing
−QC varies batch to batch: some users get great units, some need calibration work
−Artillery's community is thin compared to Creality or Elegoo
−Gets audibly loud pushing 500mm/s; this is a workshop printer, not a bedroom one
Who Should Buy Which?
Choose the Anycubic Kobra 2 Max if you want:
- A great printer for large-prints
- A great printer for cosplay
- A great printer for budget
- 420x420x500mm build
- Auto bed leveling
- Direct drive
Choose the Artillery Sidewinder X4 Plus if you want:
- A great printer for large-prints
- A great printer for budget
- A great printer for speed
- 300x300x400mm build
- Klipper
- Auto bed leveling
Frequently Asked Questions
Is the Anycubic Kobra 2 Max better than the Artillery Sidewinder X4 Plus?
By the numbers, the Artillery Sidewinder X4 Plus scores higher (7.4/10). But "better" depends on your use case, the Anycubic Kobra 2 Max may be the smarter buy if you need large-prints.
Which is better for beginners, Anycubic Kobra 2 Max or Artillery Sidewinder X4 Plus?
The Artillery Sidewinder X4 Plus is more beginner-friendly (6/10 vs 5/10) with easier setup and a gentler learning curve.
Is the Anycubic Kobra 2 Max worth $50 more than the Artillery Sidewinder X4 Plus?
The Artillery Sidewinder X4 Plus actually scores higher (7.4/10) despite costing $50 less. The Anycubic Kobra 2 Max only makes sense if you specifically need large-prints.
What's the main difference between Anycubic Kobra 2 Max and Artillery Sidewinder X4 Plus?
Build volume (420x420x500mm vs 300x300x400mm) and print speed (500 vs 500 mm/s). The Anycubic Kobra 2 Max is best for large-prints; the Artillery Sidewinder X4 Plus targets large-prints.