Anycubic Kobra 2 Max vs Creality CR-M4
Head-to-head 3D printer comparison, 2026
The Anycubic Kobra 2 Max and Creality CR-M4 are both FDM 3D printers competing in different tiers, $399 vs $599. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Anycubic Kobra 2 Max takes the crown with 7/10 vs 6/10. It pulls ahead in Value, Beginner Friendliness, Speed.
Score Breakdown
Specifications
| Spec | Anycubic Kobra 2 Max | Creality CR-M4 |
|---|---|---|
| Price | $399 | $599 |
| Type | FDM | FDM |
| Build Volume | 420 x 420 x 500 mm | 450 x 450 x 470 mm |
| Print Speed | 500 mm/s | 200 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 20.5 kg | 38 kg |
| Overall Score | 7/10 | 6/10 |
Pros & Cons
Anycubic Kobra 2 Max
+420x420x500mm for $399 is the largest bed you'll find at this budget
+Direct drive at this scale handles flexible filament when needed
+WiFi means you're not walking over with a USB stick for every job
−Open frame on a 420mm heated bed means serious adhesion prep is mandatory
−Full bed heating at this size takes 10+ minutes to reach temp
−Discontinued: Anycubic no longer supports this model
Creality CR-M4
+450mm build volume: print a torso, a chest plate, a full helmet in one run
+Dual Z axis keeps a bed this large from sagging mid-print
+Relatively affordable for the volume: comparable machines cost $1,500+
+Direct drive handles flexible and abrasive materials on a large scale
−200mm/s is the slowest print speed on the list by a wide margin: large prints take days
−38kg: this printer lives where you put it, forever
−Open frame on a 450mm machine means ABS warping is brutal without a DIY enclosure
Who Should Buy Which?
Choose the Anycubic Kobra 2 Max if you want:
- A great printer for large-prints
- A great printer for cosplay
- A great printer for budget
- 420x420x500mm build
- Auto bed leveling
- Direct drive
Choose the Creality CR-M4 if you want:
- A great printer for large-prints
- A great printer for cosplay
- A great printer for professional
- 450x450x470mm build volume
- Auto bed leveling
- Dual Z motors
Frequently Asked Questions
Is the Anycubic Kobra 2 Max better than the Creality CR-M4?
By the numbers, the Anycubic Kobra 2 Max scores higher (7/10). But "better" depends on your use case, the Creality CR-M4 may be the smarter buy if you need large-prints.
Which is better for beginners, Anycubic Kobra 2 Max or Creality CR-M4?
The Anycubic Kobra 2 Max is more beginner-friendly (5/10 vs 4/10) with easier setup and a gentler learning curve.
Is the Creality CR-M4 worth $200 more than the Anycubic Kobra 2 Max?
The Anycubic Kobra 2 Max actually scores higher (7/10) despite costing $200 less. The Creality CR-M4 only makes sense if you specifically need large-prints.
What's the main difference between Anycubic Kobra 2 Max and Creality CR-M4?
Build volume (420x420x500mm vs 450x450x470mm) and print speed (500 vs 200 mm/s). The Anycubic Kobra 2 Max is best for large-prints; the Creality CR-M4 targets large-prints.