Anycubic Kobra 2 Max vs Kingroon KP3S Pro V2
Head-to-head 3D printer comparison, 2026
The Anycubic Kobra 2 Max and Kingroon KP3S Pro V2 are both FDM 3D printers competing in different tiers, $399 vs $159. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Kingroon KP3S Pro V2 takes the crown with 7.2/10 vs 7/10. It pulls ahead in Value, Beginner Friendliness. The Anycubic Kobra 2 Max still puts up a fight in Speed.
Score Breakdown
Specifications
| Spec | Anycubic Kobra 2 Max | Kingroon KP3S Pro V2 |
|---|---|---|
| Price | $399 | $159 |
| Type | FDM | FDM |
| Build Volume | 420 x 420 x 500 mm | 200 x 200 x 200 mm |
| Print Speed | 500 mm/s | 250 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 20.5 kg | 6.5 kg |
| Overall Score | 7/10 | 7.2/10 |
Pros & Cons
Anycubic Kobra 2 Max
+420x420x500mm for $399 is the largest bed you'll find at this budget
+Direct drive at this scale handles flexible filament when needed
+WiFi means you're not walking over with a USB stick for every job
−Open frame on a 420mm heated bed means serious adhesion prep is mandatory
−Full bed heating at this size takes 10+ minutes to reach temp
−Discontinued: Anycubic no longer supports this model
Kingroon KP3S Pro V2
+Linear rails at $159 is genuinely unusual: this feature normally costs $300+
+Direct drive handles TPU without the feeding nightmares of a Bowden setup
+Compact footprint fits on a shelf without dedicating a full desk to it
−200mm cube limits what you can print in one go
−Kingroon's community is small: if something breaks, you're mostly solving it alone
−Firmware is functional but hasn't had meaningful updates in a while
Who Should Buy Which?
Choose the Anycubic Kobra 2 Max if you want:
- A great printer for large-prints
- A great printer for cosplay
- A great printer for budget
- 420x420x500mm build
- Auto bed leveling
- Direct drive
Choose the Kingroon KP3S Pro V2 if you want:
- A great printer for budget
- A great printer for compact
- Linear rails
- Direct drive
- Auto bed leveling
Frequently Asked Questions
Is the Anycubic Kobra 2 Max better than the Kingroon KP3S Pro V2?
By the numbers, the Kingroon KP3S Pro V2 scores higher (7.2/10). But "better" depends on your use case, the Anycubic Kobra 2 Max may be the smarter buy if you need large-prints.
Which is better for beginners, Anycubic Kobra 2 Max or Kingroon KP3S Pro V2?
The Kingroon KP3S Pro V2 is more beginner-friendly (7/10 vs 5/10) with easier setup and a gentler learning curve.
Is the Anycubic Kobra 2 Max worth $240 more than the Kingroon KP3S Pro V2?
The Kingroon KP3S Pro V2 actually scores higher (7.2/10) despite costing $240 less. The Anycubic Kobra 2 Max only makes sense if you specifically need large-prints.
What's the main difference between Anycubic Kobra 2 Max and Kingroon KP3S Pro V2?
Build volume (420x420x500mm vs 200x200x200mm) and print speed (500 vs 250 mm/s). The Anycubic Kobra 2 Max is best for large-prints; the Kingroon KP3S Pro V2 targets budget.