Anycubic Kobra 2 MaxDiscontinued
- Speed
- 500 mm/s
- Score
- 7/10
- Wins
- 2/5
Discontinued.
Anycubic Kobra 2 Max vs Prusa XL
- Buy the Prusa XL.
- The Anycubic Kobra 2 Max scores higher, 7 vs 6.8 out of 10, but it is discontinued.
Specs from the PrintPick catalog, checked 2026-09-29. Scores are PrintPick ratings out of 10.
Prusa XL
- Speed
- 200 mm/s
- Score
- 6.8/10
- Wins
- 2/5
The verdict
Buy the Prusa XL.
The Kobra 2 Max scores higher but is discontinued. If you're asking whether you need this, you don't. If you know you need true multi-material (not filament swapping), the XL delivers what nothing else in the consumer market can. The price and slowness are the price you pay for the capability.
Specs, side by side
Teal wins the row.
Kobra 2 MaxAnycubic · FDM
vsPrusa XLPrusa Research · FDM
| Kobra 2 Max | Spec | Prusa XL |
|---|---|---|
| 88.2 L (wins) | Build volume | 46.7 L |
| 500 mm/s (wins) | Top speed | 200 mm/s |
| 0.05 mm | Finest layer | 0.05 mm |
| 20.5 kg | Weight | 25 kg |
Features
| Kobra 2 Max | Feature | Prusa XL |
|---|---|---|
| Yes | 420x420x500mm build | No |
| Yes | Auto bed leveling | No |
| Yes | Direct drive | No |
| Yes | PEI build plate | No |
| Yes | WiFi | No |
| No | Multi-tool (up to 5 heads) | Yes |
| No | 360mm build volume | Yes |
| No | Segmented heatbed | Yes |
| No | Open source | Yes |
| No | Ethernet | Yes |
Scores out of 10
| Kobra 2 Max | Spec | Prusa XL |
|---|---|---|
| 9 (wins) | Value | 5 |
| 5 | Beginner Friendliness | 5 |
| 7 | Print Quality | 10 (wins) |
| 7 (wins) | Speed | 5 |
| 7 | Reliability | 9 (wins) |
| 7 (wins) | Overall | 6.8 |
Build space, front view, to one scale
- 420 × 420 × 500 mm
- 360 × 360 × 360 mm
What owners say
420mm bed for [this price]. Anycubic has cracked the large-format budget code.
Kobra 2 Max owner, r/cosplayPrinted a full set of armor gauntlets in one run. These huge-bed printers change what's possible.
Kobra 2 Max owner, r/3DprintingTrue tool-changing is a different league from filament swapping. The XL actually delivers.
Prusa XL owner, r/prusa3dThe most capable consumer printer ever made. If you need it, you know you need it.
Prusa XL owner, CNC Kitchen (YouTube)
Pros & Cons
Kobra 2 Max
- +420x420x500mm at this price is the largest bed you'll find at this budget
- +Direct drive at this scale handles flexible filament when needed
- +WiFi means you're not walking over with a USB stick for every job
- −Open frame on a 420mm heated bed means serious adhesion prep is mandatory
- −Full bed heating at this size takes 10+ minutes to reach temp
Prusa XL
- +5 independent tool heads means true material switching, not color blending on a single hotend
- +360mm cube handles parts that can't be split and glued
- +Segmented heated bed powers down unused zones, saving real electricity on large prints
- −At this price you still print at 200mm/s: the speed is hard to accept at this price
- −Delivery times have been 2-4 months; plan accordingly
Buy these with it
A printer does nothing without these. Grab them in the same order.
- ELEGOO PLA filament, 1kgThe easy filament to start on. Prints at low temperatures and warps less.
- ELEGOO PETG filament, 1kgTougher and more heat tolerant than PLA, for parts that get handled or sit in the sun.
- SUNLU filament dryer S1 PlusWet filament causes stringing and rough surfaces. A dryer fixes that before you blame the printer.
Frequently Asked Questions
Is the Anycubic Kobra 2 Max better than the Prusa XL?
By the numbers, the Anycubic Kobra 2 Max scores higher (7/10). But "better" depends on your use case, the Prusa XL may be the smarter buy if you need professional.
Which is better for beginners, Anycubic Kobra 2 Max or Prusa XL?
Both score 5/10 for beginners. Go with the Anycubic Kobra 2 Max, the cheaper of the two.
Is the Prusa XL worth paying more for over the Anycubic Kobra 2 Max?
The Anycubic Kobra 2 Max actually scores higher (7/10) despite costing less. The Prusa XL only makes sense if you specifically need professional.
What's the main difference between Anycubic Kobra 2 Max and Prusa XL?
Build volume (420x420x500mm vs 360x360x360mm) and print speed (500 vs 200 mm/s). The Anycubic Kobra 2 Max is best for large-prints; the Prusa XL targets professional.