Anycubic Kobra 2 Pro vs Creality CR-M4
Head-to-head 3D printer comparison, 2026
The Anycubic Kobra 2 Pro and Creality CR-M4 are both FDM 3D printers competing in different tiers, $249 vs $599. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Anycubic Kobra 2 Pro takes the crown with 8.4/10 vs 6/10. It pulls ahead in Value, Beginner Friendliness, Print Quality, Speed, Reliability.
Score Breakdown
Specifications
| Spec | Anycubic Kobra 2 Pro | Creality CR-M4 |
|---|---|---|
| Price | $249 | $599 |
| Type | FDM | FDM |
| Build Volume | 220 x 220 x 250 mm | 450 x 450 x 470 mm |
| Print Speed | 500 mm/s | 200 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 6.5 kg | 38 kg |
| Overall Score | 8.4/10 | 6/10 |
Pros & Cons
Anycubic Kobra 2 Pro
+Klipper at $249: real input shaping and pressure advance out of the box
+Direct drive handles flexibles without a fight
+26-point mesh leveling means first-layer failures are rare
+Anycubic's ecosystem has solid community support and replacement parts
−220x220mm bed is smaller than newer $250 competitors like the Neptune 4 Plus
−Open frame limits material options; ABS is borderline without modification
−Anycubic's Klipper fork is more locked-down than Elegoo or Creality stock Klipper
Creality CR-M4
+450mm build volume: print a torso, a chest plate, a full helmet in one run
+Dual Z axis keeps a bed this large from sagging mid-print
+Relatively affordable for the volume: comparable machines cost $1,500+
+Direct drive handles flexible and abrasive materials on a large scale
−200mm/s is the slowest print speed on the list by a wide margin: large prints take days
−38kg: this printer lives where you put it, forever
−Open frame on a 450mm machine means ABS warping is brutal without a DIY enclosure
Who Should Buy Which?
Choose the Anycubic Kobra 2 Pro if you want:
- A great printer for beginners
- A great printer for budget
- A great printer for speed
- Klipper firmware with input shaping and pressure advance
- 500mm/s max print speed
- Direct-drive extruder
Choose the Creality CR-M4 if you want:
- A great printer for large-prints
- A great printer for cosplay
- A great printer for professional
- 450x450x470mm build volume
- Auto bed leveling
- Dual Z motors
Frequently Asked Questions
Is the Anycubic Kobra 2 Pro better than the Creality CR-M4?
By the numbers, the Anycubic Kobra 2 Pro scores higher (8.4/10). But "better" depends on your use case, the Creality CR-M4 may be the smarter buy if you need large-prints.
Which is better for beginners, Anycubic Kobra 2 Pro or Creality CR-M4?
The Anycubic Kobra 2 Pro is more beginner-friendly (9/10 vs 4/10) with easier setup and a gentler learning curve.
Is the Creality CR-M4 worth $350 more than the Anycubic Kobra 2 Pro?
The Anycubic Kobra 2 Pro actually scores higher (8.4/10) despite costing $350 less. The Creality CR-M4 only makes sense if you specifically need large-prints.
What's the main difference between Anycubic Kobra 2 Pro and Creality CR-M4?
Build volume (220x220x250mm vs 450x450x470mm) and print speed (500 vs 200 mm/s). The Anycubic Kobra 2 Pro is best for beginners; the Creality CR-M4 targets large-prints.