Anycubic Kobra 2 Pro vs Elegoo Saturn 4 Ultra
Head-to-head 3D printer comparison, 2026
Comparing FDM to resin? The Anycubic Kobra 2 Pro ($249, FDM) and Elegoo Saturn 4 Ultra ($459, RESIN) use fundamentally different technologies. FDM melts filament layer by layer; resin cures liquid with UV light. Here's how they stack up.
Our Verdict
The Anycubic Kobra 2 Pro takes the crown with 8.4/10 vs 7.8/10. It pulls ahead in Value, Beginner Friendliness, Speed. The Elegoo Saturn 4 Ultra still puts up a fight in Print Quality.
Score Breakdown
Specifications
| Spec | Anycubic Kobra 2 Pro | Elegoo Saturn 4 Ultra |
|---|---|---|
| Price | $249 | $459 |
| Type | FDM | RESIN |
| Build Volume | 220 x 220 x 250 mm | 218 x 123 x 220 mm |
| Print Speed | 500 mm/s | 150 mm/s |
| Min Resolution | 0.05 mm | 0.01 mm |
| Weight | 6.5 kg | 11 kg |
| Overall Score | 8.4/10 | 7.8/10 |
Pros & Cons
Anycubic Kobra 2 Pro
+Klipper at $249: real input shaping and pressure advance out of the box
+Direct drive handles flexibles without a fight
+26-point mesh leveling means first-layer failures are rare
+Anycubic's ecosystem has solid community support and replacement parts
−220x220mm bed is smaller than newer $250 competitors like the Neptune 4 Plus
−Open frame limits material options; ABS is borderline without modification
−Anycubic's Klipper fork is more locked-down than Elegoo or Creality stock Klipper
Elegoo Saturn 4 Ultra
+218x123mm plate fits a full Warhammer squad in one run, not two
+12K resolution holds up just as well as the Mars at 14K for most print sizes
+Tilt release is worth it at this plate size: peel forces on large prints are brutal without it
+Terrain and base tiles look genuinely stunning at this resolution
−Resin consumption goes up fast when you're filling a plate this size
−Post-processing for a full plate run takes 45-60 minutes minimum
−The purifier helps but a plate this big curing kicks up more fumes
Who Should Buy Which?
Choose the Anycubic Kobra 2 Pro if you want:
- A great printer for beginners
- A great printer for budget
- A great printer for speed
- Klipper firmware with input shaping and pressure advance
- 500mm/s max print speed
- Direct-drive extruder
Choose the Elegoo Saturn 4 Ultra if you want:
- A great printer for resin
- A great printer for miniatures
- A great printer for large-prints
- 12K mono LCD
- Tilt release
- Air purifier
Frequently Asked Questions
Is the Anycubic Kobra 2 Pro better than the Elegoo Saturn 4 Ultra?
By the numbers, the Anycubic Kobra 2 Pro scores higher (8.4/10). But "better" depends on your use case, the Elegoo Saturn 4 Ultra may be the smarter buy if you need resin.
Which is better for beginners, Anycubic Kobra 2 Pro or Elegoo Saturn 4 Ultra?
The Anycubic Kobra 2 Pro is more beginner-friendly (9/10 vs 6/10) with easier setup and a gentler learning curve.
Is the Elegoo Saturn 4 Ultra worth $210 more than the Anycubic Kobra 2 Pro?
The Anycubic Kobra 2 Pro actually scores higher (8.4/10) despite costing $210 less. The Elegoo Saturn 4 Ultra only makes sense if you specifically need resin.
What's the main difference between Anycubic Kobra 2 Pro and Elegoo Saturn 4 Ultra?
Technology: the Anycubic Kobra 2 Pro is FDM (filament) and the Elegoo Saturn 4 Ultra is RESIN (resin). FDM prints bigger functional parts; resin delivers finer surface detail.