Anycubic Kobra S1 ACE 2 Pro Combo vs Flashforge Adventurer 5M
Head-to-head 3D printer comparison, 2026
The Anycubic Kobra S1 ACE 2 Pro Combo and Flashforge Adventurer 5M are both FDM 3D printers competing in different tiers, $499 vs $299. We scored both across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Flashforge Adventurer 5M takes the crown with 8.6/10 vs 8/10. It pulls ahead in Beginner Friendliness, Reliability.
Score Breakdown
Specifications
| Spec | Anycubic Kobra S1 ACE 2 Pro Combo | Flashforge Adventurer 5M |
|---|---|---|
| Price | $499 | $299 |
| Type | FDM | FDM |
| Build Volume | 250 x 250 x 250 mm | 220 x 220 x 220 mm |
| Print Speed | 600 mm/s | 600 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 13 kg | 11 kg |
| Overall Score | 8/10 | 8.6/10 |
Pros & Cons
Anycubic Kobra S1 ACE 2 Pro Combo
+16 colors out of the box — doubles the 8-color S1 Combo and quadruples the Bambu A1 Combo (4)
+Fully enclosed CoreXY handles ABS, ASA, and engineering filaments without warping
+44dB quiet mode is unusually low for a 600mm/s CoreXY — apartment-friendly
+Upgraded hotend is rated for the full Anycubic filament range
+Early bird €459 undercuts the Bambu P2S (€549) and matches pricing of the older 8-color S1 Combo
−Brand new product — early adopter risk on firmware and ACE 2 Pro reliability
−Anycubic slicer still trails Bambu Studio on automation and profile polish
−ACE 2 Pro adds significant desk footprint
−Early bird pricing ends May 31 — regular price expected to climb
Flashforge Adventurer 5M
+Enclosed with HEPA filter for $299: 80 dollars cheaper than the Pro version with the same key features
+Toolless nozzle swap takes 30 seconds: pull the module out, snap the new one in
+600mm/s inside an enclosure is faster than most open-frame budget machines
+Family and school-safe: hot parts contained, fumes filtered
−220mm cube is smaller than open-frame rivals at this price
−Proprietary nozzle modules: you can't use standard 0.4mm nozzles
−No camera on the base model: add $30-40 for remote monitoring
Who Should Buy Which?
Choose the Anycubic Kobra S1 ACE 2 Pro Combo if you want:
- A great printer for multi-color
- A great printer for speed
- A great printer for enclosed
- ACE 2 Pro multi-color system (up to 16 colors)
- Fully-enclosed CoreXY architecture
- Upgraded hotend (all-filament compatible)
Choose the Flashforge Adventurer 5M if you want:
- A great printer for enclosed
- A great printer for beginners
- A great printer for speed
- Enclosed
- Auto leveling
- Quick-swap nozzle
Frequently Asked Questions
Is the Anycubic Kobra S1 ACE 2 Pro Combo better than the Flashforge Adventurer 5M?
By the numbers, the Flashforge Adventurer 5M scores higher (8.6/10). But "better" depends on your use case, the Anycubic Kobra S1 ACE 2 Pro Combo may be the smarter buy if you need multi-color.
Which is better for beginners, Anycubic Kobra S1 ACE 2 Pro Combo or Flashforge Adventurer 5M?
The Flashforge Adventurer 5M is more beginner-friendly (9/10 vs 7/10) with easier setup and a gentler learning curve.
Is the Anycubic Kobra S1 ACE 2 Pro Combo worth $200 more than the Flashforge Adventurer 5M?
The Flashforge Adventurer 5M actually scores higher (8.6/10) despite costing $200 less. The Anycubic Kobra S1 ACE 2 Pro Combo only makes sense if you specifically need multi-color.
What's the main difference between Anycubic Kobra S1 ACE 2 Pro Combo and Flashforge Adventurer 5M?
Build volume (250x250x250mm vs 220x220x220mm) and print speed (600 vs 600 mm/s). The Anycubic Kobra S1 ACE 2 Pro Combo is best for multi-color; the Flashforge Adventurer 5M targets enclosed.