Anycubic Photon Mono M5s vs Elegoo Jupiter SE
Head-to-head 3D printer comparison, 2026
The Anycubic Photon Mono M5s and Elegoo Jupiter SE are both RESIN 3D printers competing in the same price bracket, $339 vs $340. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
It's a dead heat, both score 7.8/10 overall. The Anycubic Photon Mono M5s wins in no specific category, while the Elegoo Jupiter SE takes none either. Pick based on which strengths matter more to you.
Score Breakdown
Specifications
| Spec | Anycubic Photon Mono M5s | Elegoo Jupiter SE |
|---|---|---|
| Price | $339 | $340 |
| Type | RESIN | RESIN |
| Build Volume | 218 x 123 x 220 mm | 277 x 156 x 300 mm |
| Print Speed | 150 mm/s | 70 mm/s |
| Min Resolution | 0.01 mm | 0.01 mm |
| Weight | 9.5 kg | 18 kg |
| Overall Score | 7.8/10 | 7.8/10 |
Pros & Cons
Anycubic Photon Mono M5s
+14K resolution on a Saturn-size plate is the highest resolution in this build volume class
+Anti-warping release mechanism measurably reduces failed prints on larger models
+218x123mm plate handles busts, terrain, and multi-model runs
+Anycubic's community has solid troubleshooting documentation
−Pricier than the Elegoo Saturn 3 Ultra at comparable specs
−Discontinued: Anycubic support and firmware updates are ending
−App is functional but rougher than Elegoo's
Elegoo Jupiter SE
+277mm wide platform prints full-size miniature armies or large costume props in one run
+12.8-inch 6K mono screen gives better per-pixel resolution than smaller 8.9-inch screens
+COB light source delivers more even illumination across the full platform vs edge-to-edge LED arrays
+Tilt release reduces print-failure rate on large cross-sections
−18kg machine: this is a semi-permanent desk fixture, not something you move around
−Large FEP sheets cost more to replace and are harder to swap than smaller printer FEPs
−Resin handling requires PPE and ventilation regardless of size; a large vat means more resin exposure risk
−Steep beginner learning curve: hollow supports and drainage holes are mandatory at this scale
Who Should Buy Which?
Choose the Anycubic Photon Mono M5s if you want:
- A great printer for resin
- A great printer for miniatures
- A great printer for detail
- 14K mono LCD
- Anti-warping release
- Dual cooling
Choose the Elegoo Jupiter SE if you want:
- A great printer for large-prints
- A great printer for resin
- A great printer for miniatures
- A great printer for professional
- 12.8-inch 6K mono LCD screen
- 277x156x300mm build volume
- COB mono light source (60,000-hour lifespan)
Frequently Asked Questions
Is the Anycubic Photon Mono M5s better than the Elegoo Jupiter SE?
They tie at 7.8/10. The Anycubic Photon Mono M5s suits resin and miniatures, while the Elegoo Jupiter SE is aimed at large-prints and resin.
Which is better for beginners, Anycubic Photon Mono M5s or Elegoo Jupiter SE?
Both score 6/10 for beginners. Go with the Anycubic Photon Mono M5s to save $1.
Is the Elegoo Jupiter SE worth $1 more than the Anycubic Photon Mono M5s?
The Anycubic Photon Mono M5s actually scores higher (7.8/10) despite costing $1 less. The Elegoo Jupiter SE only makes sense if you specifically need large-prints.
What's the main difference between Anycubic Photon Mono M5s and Elegoo Jupiter SE?
Build volume (218x123x220mm vs 277x156x300mm) and print speed (150 vs 70 mm/s). The Anycubic Photon Mono M5s is best for resin; the Elegoo Jupiter SE targets large-prints.