Artillery Sidewinder X4 Plus vs Creality CR-M4
Head-to-head 3D printer comparison, 2026
The Artillery Sidewinder X4 Plus and Creality CR-M4 are both FDM 3D printers competing in different tiers, $349 vs $599. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Artillery Sidewinder X4 Plus takes the crown with 7.4/10 vs 6/10. It pulls ahead in Value, Beginner Friendliness, Speed.
Score Breakdown
Specifications
| Spec | Artillery Sidewinder X4 Plus | Creality CR-M4 |
|---|---|---|
| Price | $349 | $599 |
| Type | FDM | FDM |
| Build Volume | 300 x 300 x 400 mm | 450 x 450 x 470 mm |
| Print Speed | 500 mm/s | 200 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 14.5 kg | 38 kg |
| Overall Score | 7.4/10 | 6/10 |
Pros & Cons
Artillery Sidewinder X4 Plus
+300x300x400mm at $349: the price-per-cubic-millimeter is absurd
+Klipper pre-installed with room to tune
+Direct drive handles TPU and flexible materials at this large scale
+Prints armor plates and large props without slicing and gluing
−QC varies batch to batch: some users get great units, some need calibration work
−Artillery's community is thin compared to Creality or Elegoo
−Gets audibly loud pushing 500mm/s; this is a workshop printer, not a bedroom one
Creality CR-M4
+450mm build volume: print a torso, a chest plate, a full helmet in one run
+Dual Z axis keeps a bed this large from sagging mid-print
+Relatively affordable for the volume: comparable machines cost $1,500+
+Direct drive handles flexible and abrasive materials on a large scale
−200mm/s is the slowest print speed on the list by a wide margin: large prints take days
−38kg: this printer lives where you put it, forever
−Open frame on a 450mm machine means ABS warping is brutal without a DIY enclosure
Who Should Buy Which?
Choose the Artillery Sidewinder X4 Plus if you want:
- A great printer for large-prints
- A great printer for budget
- A great printer for speed
- 300x300x400mm build
- Klipper
- Auto bed leveling
Choose the Creality CR-M4 if you want:
- A great printer for large-prints
- A great printer for cosplay
- A great printer for professional
- 450x450x470mm build volume
- Auto bed leveling
- Dual Z motors
Frequently Asked Questions
Is the Artillery Sidewinder X4 Plus better than the Creality CR-M4?
By the numbers, the Artillery Sidewinder X4 Plus scores higher (7.4/10). But "better" depends on your use case, the Creality CR-M4 may be the smarter buy if you need large-prints.
Which is better for beginners, Artillery Sidewinder X4 Plus or Creality CR-M4?
The Artillery Sidewinder X4 Plus is more beginner-friendly (6/10 vs 4/10) with easier setup and a gentler learning curve.
Is the Creality CR-M4 worth $250 more than the Artillery Sidewinder X4 Plus?
The Artillery Sidewinder X4 Plus actually scores higher (7.4/10) despite costing $250 less. The Creality CR-M4 only makes sense if you specifically need large-prints.
What's the main difference between Artillery Sidewinder X4 Plus and Creality CR-M4?
Build volume (300x300x400mm vs 450x450x470mm) and print speed (500 vs 200 mm/s). The Artillery Sidewinder X4 Plus is best for large-prints; the Creality CR-M4 targets large-prints.