Artillery Sidewinder X4 Plus vs Creality Ender 3 V3 Plus
Head-to-head 3D printer comparison, 2026
The Artillery Sidewinder X4 Plus and Creality Ender 3 V3 Plus are both FDM 3D printers competing in the same price bracket, $349 vs $299. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Creality Ender 3 V3 Plus takes the crown with 8.6/10 vs 7.4/10. It pulls ahead in Value, Beginner Friendliness, Print Quality, Speed, Reliability.
Score Breakdown
Specifications
| Spec | Artillery Sidewinder X4 Plus | Creality Ender 3 V3 Plus |
|---|---|---|
| Price | $349 | $299 |
| Type | FDM | FDM |
| Build Volume | 300 x 300 x 400 mm | 300 x 300 x 330 mm |
| Print Speed | 500 mm/s | 600 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 14.5 kg | 9.7 kg |
| Overall Score | 7.4/10 | 8.6/10 |
Pros & Cons
Artillery Sidewinder X4 Plus
+300x300x400mm at $349: the price-per-cubic-millimeter is absurd
+Klipper pre-installed with room to tune
+Direct drive handles TPU and flexible materials at this large scale
+Prints armor plates and large props without slicing and gluing
−QC varies batch to batch: some users get great units, some need calibration work
−Artillery's community is thin compared to Creality or Elegoo
−Gets audibly loud pushing 500mm/s; this is a workshop printer, not a bedroom one
Creality Ender 3 V3 Plus
+$299 for 300×300×330mm and 600mm/s — no other printer at this price gets close on volume and speed simultaneously
+CoreXZ keeps the gantry lightweight for reliable high-speed moves
+Direct-drive Sprite extruder handles flexible filaments without a bowden gap
+Klipper-based firmware means real input shaping, not marketing figures
+PEI sheet gives excellent adhesion and clean part release
−Open-frame means ABS and ASA warping without an aftermarket enclosure
−CoreXZ means Y-axis moves the bed — large heavy prints can shift if acceleration is too high
−600mm/s is achievable but real-world quality prints run at 200-300mm/s
−Support quality from Creality varies; community forums are more reliable
Who Should Buy Which?
Choose the Artillery Sidewinder X4 Plus if you want:
- A great printer for large-prints
- A great printer for budget
- A great printer for speed
- 300x300x400mm build
- Klipper
- Auto bed leveling
Choose the Creality Ender 3 V3 Plus if you want:
- A great printer for large-format
- A great printer for value
- A great printer for speed
- A great printer for beginner
- CoreXZ motion system (vs CoreXY on the K1C)
- 300×300×330mm large build volume
- 600mm/s max print speed with input shaping
Frequently Asked Questions
Is the Artillery Sidewinder X4 Plus better than the Creality Ender 3 V3 Plus?
By the numbers, the Creality Ender 3 V3 Plus scores higher (8.6/10). But "better" depends on your use case, the Artillery Sidewinder X4 Plus may be the smarter buy if you need large-prints.
Which is better for beginners, Artillery Sidewinder X4 Plus or Creality Ender 3 V3 Plus?
The Creality Ender 3 V3 Plus is more beginner-friendly (8/10 vs 6/10) with easier setup and a gentler learning curve.
Is the Artillery Sidewinder X4 Plus worth $50 more than the Creality Ender 3 V3 Plus?
The Creality Ender 3 V3 Plus actually scores higher (8.6/10) despite costing $50 less. The Artillery Sidewinder X4 Plus only makes sense if you specifically need large-prints.
What's the main difference between Artillery Sidewinder X4 Plus and Creality Ender 3 V3 Plus?
Build volume (300x300x400mm vs 300x300x330mm) and print speed (500 vs 600 mm/s). The Artillery Sidewinder X4 Plus is best for large-prints; the Creality Ender 3 V3 Plus targets large-format.