Artillery Sidewinder X4 Plus vs Prusa Core One
Head-to-head 3D printer comparison, 2026
The Artillery Sidewinder X4 Plus and Prusa Core One are both FDM 3D printers competing in different tiers, $349 vs $1199. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Prusa Core One takes the crown with 8.2/10 vs 7.4/10. It pulls ahead in Beginner Friendliness, Print Quality, Reliability. That said, the Artillery Sidewinder X4 Plus saves you $850 and wins on Value.
Score Breakdown
Specifications
| Spec | Artillery Sidewinder X4 Plus | Prusa Core One |
|---|---|---|
| Price | $349 | $1199 |
| Type | FDM | FDM |
| Build Volume | 300 x 300 x 400 mm | 250 x 220 x 270 mm |
| Print Speed | 500 mm/s | 500 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 14.5 kg | 22.5 kg |
| Overall Score | 7.4/10 | 8.2/10 |
Pros & Cons
Artillery Sidewinder X4 Plus
+300x300x400mm at $349: the price-per-cubic-millimeter is absurd
+Klipper pre-installed with room to tune
+Direct drive handles TPU and flexible materials at this large scale
+Prints armor plates and large props without slicing and gluing
−QC varies batch to batch: some users get great units, some need calibration work
−Artillery's community is thin compared to Creality or Elegoo
−Gets audibly loud pushing 500mm/s; this is a workshop printer, not a bedroom one
Prusa Core One
+Prusa reliability is not marketing. It's earned over years.
+55C active chamber heating handles demanding materials
+Fully open-source, no vendor lock-in anywhere
+Kit option at $949 saves 21% if you don't mind the build
−$1,199 assembled is hard to justify against the Bambu alternatives
−Build volume is smaller than what you'd expect at this price
−22.5kg is a lot to move around
−No LiDAR, no AI monitoring
Who Should Buy Which?
Choose the Artillery Sidewinder X4 Plus if you want:
- A great printer for large-prints
- A great printer for budget
- A great printer for speed
- 300x300x400mm build
- Klipper
- Auto bed leveling
Choose the Prusa Core One if you want:
- A great printer for precision
- A great printer for professional
- A great printer for enclosed
- Enclosed CoreXY with active chamber heating (55C)
- Nextruder direct drive (10:1 planetary)
- 360-degree cooling duct
Frequently Asked Questions
Is the Artillery Sidewinder X4 Plus better than the Prusa Core One?
By the numbers, the Prusa Core One scores higher (8.2/10). But "better" depends on your use case, the Artillery Sidewinder X4 Plus may be the smarter buy if you need large-prints.
Which is better for beginners, Artillery Sidewinder X4 Plus or Prusa Core One?
The Prusa Core One is more beginner-friendly (7/10 vs 6/10) with easier setup and a gentler learning curve.
Is the Prusa Core One worth $850 more than the Artillery Sidewinder X4 Plus?
The Prusa Core One scores higher overall (8.2/10 vs 7.4/10). The extra $850 gets you prusa reliability is not marketing. it's earned over years..
What's the main difference between Artillery Sidewinder X4 Plus and Prusa Core One?
Build volume (300x300x400mm vs 250x220x270mm) and print speed (500 vs 500 mm/s). The Artillery Sidewinder X4 Plus is best for large-prints; the Prusa Core One targets precision.