Creality CR-M4
- Speed
- 200 mm/s
- Score
- 6/10
- Wins
- 0/5
Creality CR-M4 vs Flashforge Adventurer 5M
- The Flashforge Adventurer 5M wins, 8.6 vs 6 out of 10.
- CR-M4 prints 8.9× the volume (450×450×470 ÷ 220³ = 8.94) for more money.
- Adventurer 5M is faster, 600 vs 200 mm/s.
- Pick the Adventurer 5M if your prints fit in 22 cm.
Specs from the PrintPick catalog, checked 2026-09-29. Scores are PrintPick ratings out of 10.
Flashforge Adventurer 5M
- Speed
- 600 mm/s
- Score
- 8.6/10
- Wins
- 5/5
The verdict
Buy the Adventurer 5M.
8.6/10 vs CR-M4's 6/10, and it wins 5 of 5 categories. The best value enclosed printer on the market. Enclosure, HEPA, and speed at this price is hard to argue with. The Pro adds a camera and some upgrades at a higher price; most users don't need it.
Specs, side by side
Teal wins the row.
CR-M4Creality · FDM
vsAdventurer 5MFlashforge · FDM
| CR-M4 | Spec | Adventurer 5M |
|---|---|---|
| 95.2 L (wins) | Build volume | 10.6 L |
| 200 mm/s | Top speed | 600 mm/s (wins) |
| 0.05 mm | Finest layer | 0.05 mm |
| 38 kg | Weight | 11 kg |
Features
| CR-M4 | Feature | Adventurer 5M |
|---|---|---|
| Yes | 450x450x470mm build volume | No |
| Yes | Auto bed leveling | No |
| Yes | Dual Z motors | No |
| Yes | Direct drive | No |
| Yes | Filament runout sensor | No |
| No | Enclosed | Yes |
| No | Auto leveling | Yes |
| No | Quick-swap nozzle | Yes |
| No | 600mm/s speed | Yes |
| No | HEPA filter | Yes |
Scores out of 10
| CR-M4 | Spec | Adventurer 5M |
|---|---|---|
| 8 | Value | 9 (wins) |
| 4 | Beginner Friendliness | 9 (wins) |
| 7 | Print Quality | 8 (wins) |
| 4 | Speed | 9 (wins) |
| 7 | Reliability | 8 (wins) |
| 6 | Overall | 8.6 (wins) |
Build space, front view, to one scale
- 450 × 450 × 470 mm
- 220 × 220 × 220 mm
What owners say
Printed a life-size Iron Man helmet plus chest in two runs. Nothing else at this price does that.
CR-M4 owner, r/3DprintingIf you're doing cosplay at scale, the CR-M4 changes the game entirely.
CR-M4 owner, Prop Maker (YouTube)Enclosed printer under $300 with HEPA? Flashforge is pricing this thing to sell.
Adventurer 5M owner, r/3DprintingMy go-to recommendation for families. Kids safe, fumes managed, prints great.
Adventurer 5M owner, Teaching Tech (YouTube)
Pros & Cons
CR-M4
- +450mm build volume: print a torso, a chest plate, a full helmet in one run
- +Dual Z axis keeps a bed this large from sagging mid-print
- +Relatively affordable for the volume: comparable machines cost $1,500+
- −200mm/s is the slowest print speed on the list by a wide margin: large prints take days
- −38kg: this printer lives where you put it, forever
Adventurer 5M
- +Enclosed with HEPA filter: cheaper than the Pro version with the same key features
- +Toolless nozzle swap takes 30 seconds: pull the module out, snap the new one in
- +600mm/s inside an enclosure is faster than most open-frame budget machines
- −220mm cube is smaller than open-frame rivals at this price
- −Proprietary nozzle modules: you can't use standard 0.4mm nozzles
Buy these with it
A printer does nothing without these. Grab them in the same order.
- ELEGOO PLA filament, 1kgThe easy filament to start on. Prints at low temperatures and warps less.
- ELEGOO PETG filament, 1kgTougher and more heat tolerant than PLA, for parts that get handled or sit in the sun.
- SUNLU filament dryer S1 PlusWet filament causes stringing and rough surfaces. A dryer fixes that before you blame the printer.
Frequently Asked Questions
Is the Creality CR-M4 better than the Flashforge Adventurer 5M?
By the numbers, the Flashforge Adventurer 5M scores higher (8.6/10). But "better" depends on your use case, the Creality CR-M4 may be the smarter buy if you need large-prints.
Which is better for beginners, Creality CR-M4 or Flashforge Adventurer 5M?
The Flashforge Adventurer 5M is more beginner-friendly (9/10 vs 4/10) with easier setup and a gentler learning curve.
Is the Creality CR-M4 worth paying more for over the Flashforge Adventurer 5M?
The Flashforge Adventurer 5M actually scores higher (8.6/10) despite costing less. The Creality CR-M4 only makes sense if you specifically need large-prints.
What's the main difference between Creality CR-M4 and Flashforge Adventurer 5M?
Build volume (450x450x470mm vs 220x220x220mm) and print speed (200 vs 600 mm/s). The Creality CR-M4 is best for large-prints; the Flashforge Adventurer 5M targets enclosed.