Creality Ender 3 V3 Plus vs Elegoo Jupiter SE
Head-to-head 3D printer comparison, 2026
Comparing FDM to resin? The Creality Ender 3 V3 Plus ($299, FDM) and Elegoo Jupiter SE ($340, RESIN) use fundamentally different technologies. FDM melts filament layer by layer; resin cures liquid with UV light. Here's how they stack up.
Our Verdict
The Creality Ender 3 V3 Plus takes the crown with 8.6/10 vs 7.8/10. It pulls ahead in Value, Beginner Friendliness, Speed. The Elegoo Jupiter SE still puts up a fight in Print Quality.
Score Breakdown
Specifications
| Spec | Creality Ender 3 V3 Plus | Elegoo Jupiter SE |
|---|---|---|
| Price | $299 | $340 |
| Type | FDM | RESIN |
| Build Volume | 300 x 300 x 330 mm | 277 x 156 x 300 mm |
| Print Speed | 600 mm/s | 70 mm/s |
| Min Resolution | 0.05 mm | 0.01 mm |
| Weight | 9.7 kg | 18 kg |
| Overall Score | 8.6/10 | 7.8/10 |
Pros & Cons
Creality Ender 3 V3 Plus
+$299 for 300×300×330mm and 600mm/s — no other printer at this price gets close on volume and speed simultaneously
+CoreXZ keeps the gantry lightweight for reliable high-speed moves
+Direct-drive Sprite extruder handles flexible filaments without a bowden gap
+Klipper-based firmware means real input shaping, not marketing figures
+PEI sheet gives excellent adhesion and clean part release
−Open-frame means ABS and ASA warping without an aftermarket enclosure
−CoreXZ means Y-axis moves the bed — large heavy prints can shift if acceleration is too high
−600mm/s is achievable but real-world quality prints run at 200-300mm/s
−Support quality from Creality varies; community forums are more reliable
Elegoo Jupiter SE
+277mm wide platform prints full-size miniature armies or large costume props in one run
+12.8-inch 6K mono screen gives better per-pixel resolution than smaller 8.9-inch screens
+COB light source delivers more even illumination across the full platform vs edge-to-edge LED arrays
+Tilt release reduces print-failure rate on large cross-sections
−18kg machine: this is a semi-permanent desk fixture, not something you move around
−Large FEP sheets cost more to replace and are harder to swap than smaller printer FEPs
−Resin handling requires PPE and ventilation regardless of size; a large vat means more resin exposure risk
−Steep beginner learning curve: hollow supports and drainage holes are mandatory at this scale
Who Should Buy Which?
Choose the Creality Ender 3 V3 Plus if you want:
- A great printer for large-format
- A great printer for value
- A great printer for speed
- A great printer for beginner
- CoreXZ motion system (vs CoreXY on the K1C)
- 300×300×330mm large build volume
- 600mm/s max print speed with input shaping
Choose the Elegoo Jupiter SE if you want:
- A great printer for large-prints
- A great printer for resin
- A great printer for miniatures
- A great printer for professional
- 12.8-inch 6K mono LCD screen
- 277x156x300mm build volume
- COB mono light source (60,000-hour lifespan)
Frequently Asked Questions
Is the Creality Ender 3 V3 Plus better than the Elegoo Jupiter SE?
By the numbers, the Creality Ender 3 V3 Plus scores higher (8.6/10). But "better" depends on your use case, the Elegoo Jupiter SE may be the smarter buy if you need large-prints.
Which is better for beginners, Creality Ender 3 V3 Plus or Elegoo Jupiter SE?
The Creality Ender 3 V3 Plus is more beginner-friendly (8/10 vs 6/10) with easier setup and a gentler learning curve.
Is the Elegoo Jupiter SE worth $41 more than the Creality Ender 3 V3 Plus?
The Creality Ender 3 V3 Plus actually scores higher (8.6/10) despite costing $41 less. The Elegoo Jupiter SE only makes sense if you specifically need large-prints.
What's the main difference between Creality Ender 3 V3 Plus and Elegoo Jupiter SE?
Technology: the Creality Ender 3 V3 Plus is FDM (filament) and the Elegoo Jupiter SE is RESIN (resin). FDM prints bigger functional parts; resin delivers finer surface detail.