Creality Ender 3 V3 Plus vs Kingroon KLP1
Head-to-head 3D printer comparison, 2026
The Creality Ender 3 V3 Plus and Kingroon KLP1 are both FDM 3D printers competing in the same price bracket, $299 vs $299. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Creality Ender 3 V3 Plus takes the crown with 8.6/10 vs 7.6/10. It pulls ahead in Value, Beginner Friendliness, Speed, Reliability.
Score Breakdown
Specifications
| Spec | Creality Ender 3 V3 Plus | Kingroon KLP1 |
|---|---|---|
| Price | $299 | $299 |
| Type | FDM | FDM |
| Build Volume | 300 x 300 x 330 mm | 200 x 200 x 200 mm |
| Print Speed | 600 mm/s | 500 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 9.7 kg | 8.5 kg |
| Overall Score | 8.6/10 | 7.6/10 |
Pros & Cons
Creality Ender 3 V3 Plus
+$299 for 300×300×330mm and 600mm/s — no other printer at this price gets close on volume and speed simultaneously
+CoreXZ keeps the gantry lightweight for reliable high-speed moves
+Direct-drive Sprite extruder handles flexible filaments without a bowden gap
+Klipper-based firmware means real input shaping, not marketing figures
+PEI sheet gives excellent adhesion and clean part release
−Open-frame means ABS and ASA warping without an aftermarket enclosure
−CoreXZ means Y-axis moves the bed — large heavy prints can shift if acceleration is too high
−600mm/s is achievable but real-world quality prints run at 200-300mm/s
−Support quality from Creality varies; community forums are more reliable
Kingroon KLP1
+Enclosed CoreXY with linear rails and Klipper at $299: this combination normally costs $400+
+Compact enough to fit on a shelf while still being fully enclosed
+Klipper access means you can tune everything from macros to pressure advance
+CoreXY inside an enclosure means ABS and PETG print cleanly
−200mm cube is the real limitation: larger parts need splitting
−Kingroon's community is thin: if something breaks, you're mostly solving it from Klipper docs and Reddit
−Needs calibration time out of the box before it prints well
Who Should Buy Which?
Choose the Creality Ender 3 V3 Plus if you want:
- A great printer for large-format
- A great printer for value
- A great printer for speed
- A great printer for beginner
- CoreXZ motion system (vs CoreXY on the K1C)
- 300×300×330mm large build volume
- 600mm/s max print speed with input shaping
Choose the Kingroon KLP1 if you want:
- A great printer for enclosed
- A great printer for compact
- A great printer for diy
- Enclosed
- Linear rails
- CoreXY
Frequently Asked Questions
Is the Creality Ender 3 V3 Plus better than the Kingroon KLP1?
By the numbers, the Creality Ender 3 V3 Plus scores higher (8.6/10). But "better" depends on your use case, the Kingroon KLP1 may be the smarter buy if you need enclosed.
Which is better for beginners, Creality Ender 3 V3 Plus or Kingroon KLP1?
The Creality Ender 3 V3 Plus is more beginner-friendly (8/10 vs 6/10) with easier setup and a gentler learning curve.
Which is the better value, Creality Ender 3 V3 Plus or Kingroon KLP1?
Same price ($299), so it comes down to features. The Creality Ender 3 V3 Plus edges ahead on value score.
What's the main difference between Creality Ender 3 V3 Plus and Kingroon KLP1?
Build volume (300x300x330mm vs 200x200x200mm) and print speed (600 vs 500 mm/s). The Creality Ender 3 V3 Plus is best for large-format; the Kingroon KLP1 targets enclosed.