Creality Ender 3 V3 Plus vs QIDI iBox Mono2
Head-to-head 3D printer comparison, 2026
Comparing FDM to resin? The Creality Ender 3 V3 Plus ($299, FDM) and QIDI iBox Mono2 ($229, RESIN) use fundamentally different technologies. FDM melts filament layer by layer; resin cures liquid with UV light. Here's how they stack up.
Our Verdict
The Creality Ender 3 V3 Plus takes the crown with 8.6/10 vs 6.4/10. It pulls ahead in Value, Beginner Friendliness, Print Quality, Speed, Reliability. That said, the QIDI iBox Mono2 saves you $70.
Direct answer
Creality Ender 3 V3 Plus is the better pick for most buyers.
Choose Creality Ender 3 V3 Plus if you want the stronger overall score, better fit for large-format and value, and the safer recommendation. Choose QIDI iBox Mono2 only if its specific strengths matter more to you than the overall result.
Winner by buyer type
Best overall
Creality Ender 3 V3 Plus
Best value
QIDI iBox Mono2
Best build volume
Creality Ender 3 V3 Plus
Score Breakdown
Specifications
| Spec | Creality Ender 3 V3 Plus | QIDI iBox Mono2 |
|---|---|---|
| Price | $299 | $229 |
| Type | FDM | RESIN |
| Build Volume | 300 x 300 x 330 mm | 120 x 68 x 200 mm |
| Print Speed | 600 mm/s | 90 mm/s |
| Min Resolution | 0.05 mm | 0.01 mm |
| Weight | 9.7 kg | 5.2 kg |
| Overall Score | 8.6/10 | 6.4/10 |
Pros & Cons
Creality Ender 3 V3 Plus
+$299 for 300×300×330mm and 600mm/s — no other printer at this price gets close on volume and speed simultaneously
+CoreXZ keeps the gantry lightweight for reliable high-speed moves
+Direct-drive Sprite extruder handles flexible filaments without a bowden gap
+Klipper-based firmware means real input shaping, not marketing figures
+PEI sheet gives excellent adhesion and clean part release
−Open-frame means ABS and ASA warping without an aftermarket enclosure
−CoreXZ means Y-axis moves the bed — large heavy prints can shift if acceleration is too high
−600mm/s is achievable but real-world quality prints run at 200-300mm/s
−Support quality from Creality varies; community forums are more reliable
QIDI iBox Mono2
+Enclosed design contains resin fumes better than open printers without relying solely on a purifier
+WiFi standard, unlike some competitors at this price
+QIDI build quality is solid and consistent
+Minimal footprint fits where other resin printers won't
−4K resolution is significantly behind competitors offering 9K at the same price
−120x68mm build volume is one of the smallest in the category
−$229 for 4K when Elegoo Mars 4 gives you 7K for $149 is a tough math problem
−QIDI's resin community is small: problems stay unsolved longer
Who Should Buy Which?
Choose the Creality Ender 3 V3 Plus if you want:
- A great printer for large-format
- A great printer for value
- A great printer for speed
- A great printer for beginner
- CoreXZ motion system (vs CoreXY on the K1C)
- 300×300×330mm large build volume
- 600mm/s max print speed with input shaping
Choose the QIDI iBox Mono2 if you want:
- A great printer for resin
- A great printer for miniatures
- A great printer for compact
- 4K mono LCD
- Enclosed design
- WiFi
Frequently Asked Questions
Is the Creality Ender 3 V3 Plus better than the QIDI iBox Mono2?
By the numbers, the Creality Ender 3 V3 Plus scores higher (8.6/10). But "better" depends on your use case, the QIDI iBox Mono2 may be the smarter buy if you need resin.
Which is better for beginners, Creality Ender 3 V3 Plus or QIDI iBox Mono2?
The Creality Ender 3 V3 Plus is more beginner-friendly (8/10 vs 6/10) with easier setup and a gentler learning curve.
Is the Creality Ender 3 V3 Plus worth $70 more than the QIDI iBox Mono2?
The Creality Ender 3 V3 Plus scores higher overall (8.6/10 vs 6.4/10). The extra $70 gets you $299 for 300×300×330mm and 600mm/s — no other printer at this price gets close on volume and speed simultaneously.
What's the main difference between Creality Ender 3 V3 Plus and QIDI iBox Mono2?
Technology: the Creality Ender 3 V3 Plus is FDM (filament) and the QIDI iBox Mono2 is RESIN (resin). FDM prints bigger functional parts; resin delivers finer surface detail.