Elegoo Jupiter SE vs Elegoo Mars 4 Ultra
Head-to-head 3D printer comparison, 2026
Choosing between two Elegoo printers? The Elegoo Jupiter SE ($340) and Elegoo Mars 4 Ultra ($199) both come from one of the most trusted names in 3D printing, with a $141 gap between them. Here's how they compare across every category that matters.
Our Verdict
It's a dead heat, both score 7.8/10 overall. The Elegoo Jupiter SE wins in Print Quality, Speed, while the Elegoo Mars 4 Ultra takes Value, Beginner Friendliness. Pick based on which strengths matter more to you.
Score Breakdown
Specifications
| Spec | Elegoo Jupiter SE | Elegoo Mars 4 Ultra |
|---|---|---|
| Price | $340 | $199 |
| Type | RESIN | RESIN |
| Build Volume | 277 x 156 x 300 mm | 153 x 77 x 165 mm |
| Print Speed | 70 mm/s | 100 mm/s |
| Min Resolution | 0.01 mm | 0.01 mm |
| Weight | 18 kg | 6.8 kg |
| Overall Score | 7.8/10 | 7.8/10 |
Pros & Cons
Elegoo Jupiter SE
+277mm wide platform prints full-size miniature armies or large costume props in one run
+12.8-inch 6K mono screen gives better per-pixel resolution than smaller 8.9-inch screens
+COB light source delivers more even illumination across the full platform vs edge-to-edge LED arrays
+Tilt release reduces print-failure rate on large cross-sections
−18kg machine: this is a semi-permanent desk fixture, not something you move around
−Large FEP sheets cost more to replace and are harder to swap than smaller printer FEPs
−Resin handling requires PPE and ventilation regardless of size; a large vat means more resin exposure risk
−Steep beginner learning curve: hollow supports and drainage holes are mandatory at this scale
Elegoo Mars 4 Ultra
+9K resolution is a meaningful jump from 7K: finer surface texture, sharper edges on small parts
+Tilt release means FEP films last longer; $50 less per year in consumables is real money
+Built-in air purifier takes the edge off the smell without requiring an external solution
+WiFi monitoring means you can start a print and check it from another room
−153x77mm plate is tight for anything larger than small character models
−Still needs a wash and cure station: budget $50-80 extra
−Resin workflow is messier and slower to start than FDM
Who Should Buy Which?
Choose the Elegoo Jupiter SE if you want:
- A great printer for large-prints
- A great printer for resin
- A great printer for miniatures
- A great printer for professional
- 12.8-inch 6K mono LCD screen
- 277x156x300mm build volume
- COB mono light source (60,000-hour lifespan)
Choose the Elegoo Mars 4 Ultra if you want:
- A great printer for miniatures
- A great printer for resin
- A great printer for budget
- 9K mono LCD
- Tilt release
- WiFi
Frequently Asked Questions
Is the Elegoo Jupiter SE better than the Elegoo Mars 4 Ultra?
They tie at 7.8/10. The Elegoo Jupiter SE suits large-prints and resin, while the Elegoo Mars 4 Ultra is aimed at miniatures and resin.
Which is better for beginners, Elegoo Jupiter SE or Elegoo Mars 4 Ultra?
The Elegoo Mars 4 Ultra is more beginner-friendly (7/10 vs 6/10) with easier setup and a gentler learning curve.
Is the Elegoo Jupiter SE worth $141 more than the Elegoo Mars 4 Ultra?
The Elegoo Mars 4 Ultra actually scores higher (7.8/10) despite costing $141 less. The Elegoo Jupiter SE only makes sense if you specifically need large-prints.
What's the main difference between Elegoo Jupiter SE and Elegoo Mars 4 Ultra?
Build volume (277x156x300mm vs 153x77x165mm) and print speed (70 vs 100 mm/s). The Elegoo Jupiter SE is best for large-prints; the Elegoo Mars 4 Ultra targets miniatures.