Elegoo Jupiter SE vs Elegoo Mars 5 Ultra
Head-to-head 3D printer comparison, 2026
Choosing between two Elegoo printers? The Elegoo Jupiter SE ($340) and Elegoo Mars 5 Ultra ($284) both come from one of the most trusted names in 3D printing, with a $56 gap between them. Here's how they compare across every category that matters.
Our Verdict
The Elegoo Mars 5 Ultra takes the crown with 8.2/10 vs 7.8/10. It pulls ahead in Value, Beginner Friendliness.
Score Breakdown
Specifications
| Spec | Elegoo Jupiter SE | Elegoo Mars 5 Ultra |
|---|---|---|
| Price | $340 | $284 |
| Type | RESIN | RESIN |
| Build Volume | 277 x 156 x 300 mm | 153 x 89 x 200 mm |
| Print Speed | 70 mm/s | 150 mm/s |
| Min Resolution | 0.01 mm | 0.01 mm |
| Weight | 18 kg | 7.5 kg |
| Overall Score | 7.8/10 | 8.2/10 |
Pros & Cons
Elegoo Jupiter SE
+277mm wide platform prints full-size miniature armies or large costume props in one run
+12.8-inch 6K mono screen gives better per-pixel resolution than smaller 8.9-inch screens
+COB light source delivers more even illumination across the full platform vs edge-to-edge LED arrays
+Tilt release reduces print-failure rate on large cross-sections
−18kg machine: this is a semi-permanent desk fixture, not something you move around
−Large FEP sheets cost more to replace and are harder to swap than smaller printer FEPs
−Resin handling requires PPE and ventilation regardless of size; a large vat means more resin exposure risk
−Steep beginner learning curve: hollow supports and drainage holes are mandatory at this scale
Elegoo Mars 5 Ultra
+14K resolution renders chainmail and sword hilts at a level FDM can't get near
+Tilt release means fewer ripped FEP films mid-print
+Built-in air purifier cuts the resin smell noticeably; still needs ventilation but less aggressively
+WiFi monitoring so you don't have to babysit the machine
−Build plate is 153x89mm: anything larger needs to be sliced and assembled
−Resin printing means gloves, IPA, and a wash station are non-negotiable purchases
−Post-processing adds 30-45 minutes after every print: wash, cure, support removal
Who Should Buy Which?
Choose the Elegoo Jupiter SE if you want:
- A great printer for large-prints
- A great printer for resin
- A great printer for miniatures
- A great printer for professional
- 12.8-inch 6K mono LCD screen
- 277x156x300mm build volume
- COB mono light source (60,000-hour lifespan)
Choose the Elegoo Mars 5 Ultra if you want:
- A great printer for miniatures
- A great printer for resin
- A great printer for detail
- 14K mono LCD
- Tilt release
- Air purifier
Frequently Asked Questions
Is the Elegoo Jupiter SE better than the Elegoo Mars 5 Ultra?
By the numbers, the Elegoo Mars 5 Ultra scores higher (8.2/10). But "better" depends on your use case, the Elegoo Jupiter SE may be the smarter buy if you need large-prints.
Which is better for beginners, Elegoo Jupiter SE or Elegoo Mars 5 Ultra?
The Elegoo Mars 5 Ultra is more beginner-friendly (7/10 vs 6/10) with easier setup and a gentler learning curve.
Is the Elegoo Jupiter SE worth $56 more than the Elegoo Mars 5 Ultra?
The Elegoo Mars 5 Ultra actually scores higher (8.2/10) despite costing $56 less. The Elegoo Jupiter SE only makes sense if you specifically need large-prints.
What's the main difference between Elegoo Jupiter SE and Elegoo Mars 5 Ultra?
Build volume (277x156x300mm vs 153x89x200mm) and print speed (70 vs 150 mm/s). The Elegoo Jupiter SE is best for large-prints; the Elegoo Mars 5 Ultra targets miniatures.