Elegoo Jupiter SE vs Flashforge Adventurer 5M Pro
Head-to-head 3D printer comparison, 2026
Comparing FDM to resin? The Elegoo Jupiter SE ($340, RESIN) and Flashforge Adventurer 5M Pro ($379, FDM) use fundamentally different technologies. FDM melts filament layer by layer; resin cures liquid with UV light. Here's how they stack up.
Our Verdict
The Flashforge Adventurer 5M Pro takes the crown with 8.6/10 vs 7.8/10. It pulls ahead in Value, Beginner Friendliness, Speed. That said, the Elegoo Jupiter SE saves you $39 and wins on Print Quality.
Score Breakdown
Specifications
| Spec | Elegoo Jupiter SE | Flashforge Adventurer 5M Pro |
|---|---|---|
| Price | $340 | $379 |
| Type | RESIN | FDM |
| Build Volume | 277 x 156 x 300 mm | 220 x 220 x 220 mm |
| Print Speed | 70 mm/s | 600 mm/s |
| Min Resolution | 0.01 mm | 0.05 mm |
| Weight | 18 kg | 12.5 kg |
| Overall Score | 7.8/10 | 8.6/10 |
Pros & Cons
Elegoo Jupiter SE
+277mm wide platform prints full-size miniature armies or large costume props in one run
+12.8-inch 6K mono screen gives better per-pixel resolution than smaller 8.9-inch screens
+COB light source delivers more even illumination across the full platform vs edge-to-edge LED arrays
+Tilt release reduces print-failure rate on large cross-sections
−18kg machine: this is a semi-permanent desk fixture, not something you move around
−Large FEP sheets cost more to replace and are harder to swap than smaller printer FEPs
−Resin handling requires PPE and ventilation regardless of size; a large vat means more resin exposure risk
−Steep beginner learning curve: hollow supports and drainage holes are mandatory at this scale
Flashforge Adventurer 5M Pro
+HEPA filter and enclosure at $379 is genuinely rare in this class
+Nozzle swaps with no tools: pull out, push in, done in 30 seconds
+600mm/s means speed doesn't suffer for the enclosure premium
+ABS prints more reliably than any open-frame machine at this price
−220x220mm build volume is cramped compared to open-frame rivals
−Proprietary nozzles mean you can't raid a generic nozzle pack
−Flashforge's community is small: if something breaks, you're often on your own
Who Should Buy Which?
Choose the Elegoo Jupiter SE if you want:
- A great printer for large-prints
- A great printer for resin
- A great printer for miniatures
- A great printer for professional
- 12.8-inch 6K mono LCD screen
- 277x156x300mm build volume
- COB mono light source (60,000-hour lifespan)
Choose the Flashforge Adventurer 5M Pro if you want:
- A great printer for beginners
- A great printer for enclosed
- A great printer for speed
- Enclosed
- Auto leveling
- Quick-swap nozzle
Frequently Asked Questions
Is the Elegoo Jupiter SE better than the Flashforge Adventurer 5M Pro?
By the numbers, the Flashforge Adventurer 5M Pro scores higher (8.6/10). But "better" depends on your use case, the Elegoo Jupiter SE may be the smarter buy if you need large-prints.
Which is better for beginners, Elegoo Jupiter SE or Flashforge Adventurer 5M Pro?
The Flashforge Adventurer 5M Pro is more beginner-friendly (9/10 vs 6/10) with easier setup and a gentler learning curve.
Is the Flashforge Adventurer 5M Pro worth $39 more than the Elegoo Jupiter SE?
The Flashforge Adventurer 5M Pro scores higher overall (8.6/10 vs 7.8/10). The extra $39 gets you hepa filter and enclosure at $379 is genuinely rare in this class.
What's the main difference between Elegoo Jupiter SE and Flashforge Adventurer 5M Pro?
Technology: the Elegoo Jupiter SE is RESIN (filament) and the Flashforge Adventurer 5M Pro is FDM (resin). FDM prints bigger functional parts; resin delivers finer surface detail.