Elegoo Jupiter SE vs Phrozen Sonic Mini 8K S
Head-to-head 3D printer comparison, 2026
The Elegoo Jupiter SE and Phrozen Sonic Mini 8K S are both RESIN 3D printers competing in the same price bracket, $340 vs $329. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Elegoo Jupiter SE takes the crown with 7.8/10 vs 7.2/10. It pulls ahead in Speed. That said, the Phrozen Sonic Mini 8K S saves you $11.
Score Breakdown
Specifications
| Spec | Elegoo Jupiter SE | Phrozen Sonic Mini 8K S |
|---|---|---|
| Price | $340 | $329 |
| Type | RESIN | RESIN |
| Build Volume | 277 x 156 x 300 mm | 165 x 72 x 180 mm |
| Print Speed | 70 mm/s | 80 mm/s |
| Min Resolution | 0.01 mm | 0.01 mm |
| Weight | 18 kg | 6.5 kg |
| Overall Score | 7.8/10 | 7.2/10 |
Pros & Cons
Elegoo Jupiter SE
+277mm wide platform prints full-size miniature armies or large costume props in one run
+12.8-inch 6K mono screen gives better per-pixel resolution than smaller 8.9-inch screens
+COB light source delivers more even illumination across the full platform vs edge-to-edge LED arrays
+Tilt release reduces print-failure rate on large cross-sections
−18kg machine: this is a semi-permanent desk fixture, not something you move around
−Large FEP sheets cost more to replace and are harder to swap than smaller printer FEPs
−Resin handling requires PPE and ventilation regardless of size; a large vat means more resin exposure risk
−Steep beginner learning curve: hollow supports and drainage holes are mandatory at this scale
Phrozen Sonic Mini 8K S
+22-micron XY resolution: individual scales on dragon miniatures, every rivet on armor, no blurring
+ParaLED 3.0 delivers even exposure across the full plate, no hot spots
+Mono LCD longevity is proven at 2,000+ hours without degradation
+Phrozen's resin profiles are dialed in out of the box
−80mm/hr print speed is the slowest on this list: patience required
−165x72mm plate is tiny; large models need slicing and gluing
−No WiFi: USB drive and manual file management only
−Phrozen's recommended resin is pricier than generic alternatives
Who Should Buy Which?
Choose the Elegoo Jupiter SE if you want:
- A great printer for large-prints
- A great printer for resin
- A great printer for miniatures
- A great printer for professional
- 12.8-inch 6K mono LCD screen
- 277x156x300mm build volume
- COB mono light source (60,000-hour lifespan)
Choose the Phrozen Sonic Mini 8K S if you want:
- A great printer for miniatures
- A great printer for detail
- A great printer for resin
- 7.1" 8K mono LCD
- 22-micron XY resolution
- ParaLED 3.0
Frequently Asked Questions
Is the Elegoo Jupiter SE better than the Phrozen Sonic Mini 8K S?
By the numbers, the Elegoo Jupiter SE scores higher (7.8/10). But "better" depends on your use case, the Phrozen Sonic Mini 8K S may be the smarter buy if you need miniatures.
Which is better for beginners, Elegoo Jupiter SE or Phrozen Sonic Mini 8K S?
Both score 6/10 for beginners. Go with the Phrozen Sonic Mini 8K S to save $11.
Is the Elegoo Jupiter SE worth $11 more than the Phrozen Sonic Mini 8K S?
The Elegoo Jupiter SE scores higher overall (7.8/10 vs 7.2/10). The extra $11 gets you 277mm wide platform prints full-size miniature armies or large costume props in one run.
What's the main difference between Elegoo Jupiter SE and Phrozen Sonic Mini 8K S?
Build volume (277x156x300mm vs 165x72x180mm) and print speed (70 vs 80 mm/s). The Elegoo Jupiter SE is best for large-prints; the Phrozen Sonic Mini 8K S targets miniatures.