Elegoo Jupiter SE vs Sovol SV06 Plus
Head-to-head 3D printer comparison, 2026
Comparing FDM to resin? The Elegoo Jupiter SE ($340, RESIN) and Sovol SV06 Plus ($299, FDM) use fundamentally different technologies. FDM melts filament layer by layer; resin cures liquid with UV light. Here's how they stack up.
Our Verdict
The Elegoo Jupiter SE takes the crown with 7.8/10 vs 7.2/10. It pulls ahead in Print Quality, Speed. That said, the Sovol SV06 Plus saves you $41 and wins on Value.
Score Breakdown
Specifications
| Spec | Elegoo Jupiter SE | Sovol SV06 Plus |
|---|---|---|
| Price | $340 | $299 |
| Type | RESIN | FDM |
| Build Volume | 277 x 156 x 300 mm | 300 x 300 x 340 mm |
| Print Speed | 70 mm/s | 250 mm/s |
| Min Resolution | 0.01 mm | 0.05 mm |
| Weight | 18 kg | 12 kg |
| Overall Score | 7.8/10 | 7.2/10 |
Pros & Cons
Elegoo Jupiter SE
+277mm wide platform prints full-size miniature armies or large costume props in one run
+12.8-inch 6K mono screen gives better per-pixel resolution than smaller 8.9-inch screens
+COB light source delivers more even illumination across the full platform vs edge-to-edge LED arrays
+Tilt release reduces print-failure rate on large cross-sections
−18kg machine: this is a semi-permanent desk fixture, not something you move around
−Large FEP sheets cost more to replace and are harder to swap than smaller printer FEPs
−Resin handling requires PPE and ventilation regardless of size; a large vat means more resin exposure risk
−Steep beginner learning curve: hollow supports and drainage holes are mandatory at this scale
Sovol SV06 Plus
+300x300mm bed at $299 is 37% more area than the Ender 3's 220mm
+Linear rails mean consistent layer quality even on long print runs
+All-metal hotend handles PETG and ABS without heat creep issues
+Proven design with enough community documentation to solve most problems
−250mm/s max speed is slower than the modern budget standard
−Larger footprint than the Ender 3: measure your space first
−Bed leveling needs regular attention at this plate size
Who Should Buy Which?
Choose the Elegoo Jupiter SE if you want:
- A great printer for large-prints
- A great printer for resin
- A great printer for miniatures
- A great printer for professional
- 12.8-inch 6K mono LCD screen
- 277x156x300mm build volume
- COB mono light source (60,000-hour lifespan)
Choose the Sovol SV06 Plus if you want:
- A great printer for large-prints
- A great printer for budget
- A great printer for reliability
- All-metal direct drive
- Auto bed leveling
- PEI build plate
Frequently Asked Questions
Is the Elegoo Jupiter SE better than the Sovol SV06 Plus?
By the numbers, the Elegoo Jupiter SE scores higher (7.8/10). But "better" depends on your use case, the Sovol SV06 Plus may be the smarter buy if you need large-prints.
Which is better for beginners, Elegoo Jupiter SE or Sovol SV06 Plus?
Both score 6/10 for beginners. Go with the Sovol SV06 Plus to save $41.
Is the Elegoo Jupiter SE worth $41 more than the Sovol SV06 Plus?
The Elegoo Jupiter SE scores higher overall (7.8/10 vs 7.2/10). The extra $41 gets you 277mm wide platform prints full-size miniature armies or large costume props in one run.
What's the main difference between Elegoo Jupiter SE and Sovol SV06 Plus?
Technology: the Elegoo Jupiter SE is RESIN (filament) and the Sovol SV06 Plus is FDM (resin). FDM prints bigger functional parts; resin delivers finer surface detail.