Kingroon KLP1 vs QIDI X-Max 3
Head-to-head 3D printer comparison, 2026
The Kingroon KLP1 and QIDI X-Max 3 are both FDM 3D printers competing in different tiers, $299 vs $799. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The QIDI X-Max 3 takes the crown with 8/10 vs 7.6/10. It pulls ahead in Print Quality, Speed, Reliability. That said, the Kingroon KLP1 saves you $500 and wins on Value.
Score Breakdown
Specifications
| Spec | Kingroon KLP1 | QIDI X-Max 3 |
|---|---|---|
| Price | $299 | $799 |
| Type | FDM | FDM |
| Build Volume | 200 x 200 x 200 mm | 325 x 325 x 315 mm |
| Print Speed | 500 mm/s | 600 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 8.5 kg | 25 kg |
| Overall Score | 7.6/10 | 8/10 |
Pros & Cons
Kingroon KLP1
+Enclosed CoreXY with linear rails and Klipper at $299: this combination normally costs $400+
+Compact enough to fit on a shelf while still being fully enclosed
+Klipper access means you can tune everything from macros to pressure advance
+CoreXY inside an enclosure means ABS and PETG print cleanly
−200mm cube is the real limitation: larger parts need splitting
−Kingroon's community is thin: if something breaks, you're mostly solving it from Klipper docs and Reddit
−Needs calibration time out of the box before it prints well
QIDI X-Max 3
+325mm enclosed with 60C active heating is a combination you almost can't find under $1,500
+Independent Z motors keep the bed trammed even on 24-hour prints
+Handles PA-CF and PC natively without a fight
+600mm/s in a large-format heated chamber is rare at any price
−25kg: set it up once and it lives there
−$799 with a smaller community than Bambu means you're mostly on your own troubleshooting
−QIDI's slicer profiles are thin for specialty materials
Who Should Buy Which?
Choose the Kingroon KLP1 if you want:
- A great printer for enclosed
- A great printer for compact
- A great printer for diy
- Enclosed
- Linear rails
- CoreXY
Choose the QIDI X-Max 3 if you want:
- A great printer for large-prints
- A great printer for engineering
- A great printer for professional
- Enclosed
- Large CoreXY
- Chamber heating (60C)
Frequently Asked Questions
Is the Kingroon KLP1 better than the QIDI X-Max 3?
By the numbers, the QIDI X-Max 3 scores higher (8/10). But "better" depends on your use case, the Kingroon KLP1 may be the smarter buy if you need enclosed.
Which is better for beginners, Kingroon KLP1 or QIDI X-Max 3?
Both score 6/10 for beginners. Go with the Kingroon KLP1 to save $500.
Is the QIDI X-Max 3 worth $500 more than the Kingroon KLP1?
The QIDI X-Max 3 scores higher overall (8/10 vs 7.6/10). The extra $500 gets you 325mm enclosed with 60c active heating is a combination you almost can't find under $1,500.
What's the main difference between Kingroon KLP1 and QIDI X-Max 3?
Build volume (200x200x200mm vs 325x325x315mm) and print speed (500 vs 600 mm/s). The Kingroon KLP1 is best for enclosed; the QIDI X-Max 3 targets large-prints.