Sovol SV08
- Speed
- 700 mm/s
- Score
- 7.8/10
- Wins
- 2/5
Sovol SV08 vs Voxelab Aquila X2
- The Sovol SV08 wins, 7.8 vs 6.6 out of 10.
- SV08 prints 4.0× the volume (350×350×400 ÷ 220×220×250 = 4.05) for more money.
- SV08 is faster, 700 vs 180 mm/s.
- Pick the Aquila X2 if your prints fit in 25 cm.
Specs from the PrintPick catalog, checked 2026-09-29. Scores are PrintPick ratings out of 10.
Voxelab Aquila X2
- Speed
- 180 mm/s
- Score
- 6.6/10
- Wins
- 1/5
The verdict
Buy the SV08.
7.8/10 vs Aquila X2's 6.6/10, and it wins 2 of 5 categories. Experienced tinkerers only. You'll spend real time dialing this in and it'll reward you with Voron-level prints. Beginners should not buy this machine: it's not a bad printer, it's the wrong tool.
Specs, side by side
Teal wins the row.
SV08Sovol · FDM
vsAquila X2Voxelab · FDM
| SV08 | Spec | Aquila X2 |
|---|---|---|
| 49.0 L (wins) | Build volume | 12.1 L |
| 700 mm/s (wins) | Top speed | 180 mm/s |
| 0.05 mm | Finest layer | 0.05 mm |
| 20 kg | Weight | 7.8 kg |
Features
| SV08 | Feature | Aquila X2 |
|---|---|---|
| Yes | Voron-inspired CoreXY | No |
| Yes | Klipper | No |
| Yes | Auto bed leveling | No |
| Yes | 350mm build volume | No |
| Yes | Open design | No |
| No | Resume printing | Yes |
| No | Filament runout sensor | Yes |
| No | Glass build plate | Yes |
| No | Silent stepper drivers | Yes |
Scores out of 10
| SV08 | Spec | Aquila X2 |
|---|---|---|
| 9 | Value | 9 |
| 5 | Beginner Friendliness | 7 (wins) |
| 8 (wins) | Print Quality | 6 |
| 10 (wins) | Speed | 4 |
| 7 | Reliability | 7 |
| 7.8 (wins) | Overall | 6.6 |
Build space, front view, to one scale
- 350 × 350 × 400 mm
- 220 × 220 × 250 mm
What owners say
Voron performance without spending months sourcing parts and building. Sign me up.
SV08 owner, r/VORONDesign700mm/s is no joke. This thing absolutely rips.
SV08 owner, Nero3D (YouTube)Solid starter printer. Not flashy, but it works and teaches you the fundamentals.
Aquila X2 owner, r/3Dprinting
Pros & Cons
SV08
- +Voron 2.4 kinematics for less than the $1,000+ in DIY parts and time
- +350x350x400mm bed handles nearly anything without splitting prints
- +700mm/s is a real number that the machine hits in practice with tuning
- −Out-of-box calibration takes several hours for first-timers
- −QC is inconsistent between batches: some units are great, some need work
Aquila X2
- +Silent stepper drivers mean it runs without disturbing the room
- +Manual leveling teaches you what auto-leveling actually does
- +Ender 3-compatible mods are everywhere and cheap
- −Manual bed leveling is a chore you'll do every few prints until you upgrade it
- −Bowden extruder makes TPU printing a frustrating exercise
Buy these with it
A printer does nothing without these. Grab them in the same order.
- ELEGOO PLA filament, 1kgThe easy filament to start on. Prints at low temperatures and warps less.
- ELEGOO PETG filament, 1kgTougher and more heat tolerant than PLA, for parts that get handled or sit in the sun.
- SUNLU filament dryer S1 PlusWet filament causes stringing and rough surfaces. A dryer fixes that before you blame the printer.
Frequently Asked Questions
Is the Sovol SV08 better than the Voxelab Aquila X2?
By the numbers, the Sovol SV08 scores higher (7.8/10). But "better" depends on your use case, the Voxelab Aquila X2 may be the smarter buy if you need budget.
Which is better for beginners, Sovol SV08 or Voxelab Aquila X2?
The Voxelab Aquila X2 is more beginner-friendly (7/10 vs 5/10) with easier setup and a gentler learning curve.
Is the Sovol SV08 worth paying more for over the Voxelab Aquila X2?
The Sovol SV08 scores higher overall (7.8/10 vs 6.6/10). The extra money gets you voron 2.4 kinematics for less than the $1,000+ in diy parts and time.
What's the main difference between Sovol SV08 and Voxelab Aquila X2?
Build volume (350x350x400mm vs 220x220x250mm) and print speed (700 vs 180 mm/s). The Sovol SV08 is best for large-prints; the Voxelab Aquila X2 targets budget.