Build Volume Calculator
Enter your model's dimensions. See which printers fit it. Simple as that.
Model Dimensions (mm)
Enter all three dimensions above to see which printers fit your model.
How the fit check works
A printer fits when your width, depth and height are each no bigger than its build volume on the same axis. All three have to pass.
- No rotation: the check compares width to width and depth to depth. If a model fails, try swapping X and Y, or lay it on a different side.
- Headroom: the smallest margin left on any axis, as a percentage. A brim or raft adds a few millimeters around the base, so a fit with almost no headroom may need a different orientation.
- Order: printers that fit come first, sorted by overall score, followed by the ones that don't.
Across the 63 current printers, the smallest build volume belongs to the Anycubic Photon Mono 4 at 134 x 75 x 130mm, and the largest to the Creality CR-M4 at 450 x 450 x 470mm. The tallest is the Elegoo Neptune 4 Max, with 480mm of Z height.
13 current printers have a bed of at least 300 x 300mm, and 17 can print 300mm or taller. The largest resin build volume is the Phrozen Sonic Mega 8K S2 at 330 x 185 x 400mm, across 12 current resin printers.
Build volumes come from the same printer data used across PrintPick, so the list stays in step with the reviews.