Anycubic Kobra 2 Max vs Sovol SV07 Plus
Head-to-head 3D printer comparison, 2026
The Anycubic Kobra 2 Max and Sovol SV07 Plus are both FDM 3D printers competing in the same price bracket, $399 vs $339. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
It's a dead heat, both score 7/10 overall. The Anycubic Kobra 2 Max wins in no specific category, while the Sovol SV07 Plus takes none either. Pick based on which strengths matter more to you.
Score Breakdown
Specifications
| Spec | Anycubic Kobra 2 Max | Sovol SV07 Plus |
|---|---|---|
| Price | $399 | $339 |
| Type | FDM | FDM |
| Build Volume | 420 x 420 x 500 mm | 300 x 300 x 350 mm |
| Print Speed | 500 mm/s | 500 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 20.5 kg | 16.5 kg |
| Overall Score | 7/10 | 7/10 |
Pros & Cons
Anycubic Kobra 2 Max
+420x420x500mm for $399 is the largest bed you'll find at this budget
+Direct drive at this scale handles flexible filament when needed
+WiFi means you're not walking over with a USB stick for every job
−Open frame on a 420mm heated bed means serious adhesion prep is mandatory
−Full bed heating at this size takes 10+ minutes to reach temp
−Discontinued: Anycubic no longer supports this model
Sovol SV07 Plus
+300x300x350mm with Klipper for $339: larger than the Artillery Sidewinder for less money
+Pre-installed Klipper means proper input shaping at this bed size
+Direct drive at 300mm scale is a feature most competitors skip
+Sovol's Klipper configs are more complete out-of-box than most budget machines
−Out-of-box calibration takes 2-3 hours for new users: this is not plug-and-play
−Sovol community is small: you'll hit gaps in documentation when troubleshooting
−Open frame at this bed size means ABS adhesion is a real challenge
Who Should Buy Which?
Choose the Anycubic Kobra 2 Max if you want:
- A great printer for large-prints
- A great printer for cosplay
- A great printer for budget
- 420x420x500mm build
- Auto bed leveling
- Direct drive
Choose the Sovol SV07 Plus if you want:
- A great printer for large-prints
- A great printer for budget
- A great printer for diy
- Klipper firmware
- Auto bed leveling
- Direct drive
Frequently Asked Questions
Is the Anycubic Kobra 2 Max better than the Sovol SV07 Plus?
They tie at 7/10. The Anycubic Kobra 2 Max suits large-prints and cosplay, while the Sovol SV07 Plus is aimed at large-prints and budget.
Which is better for beginners, Anycubic Kobra 2 Max or Sovol SV07 Plus?
Both score 5/10 for beginners. Go with the Sovol SV07 Plus to save $60.
Is the Anycubic Kobra 2 Max worth $60 more than the Sovol SV07 Plus?
The Sovol SV07 Plus actually scores higher (7/10) despite costing $60 less. The Anycubic Kobra 2 Max only makes sense if you specifically need large-prints.
What's the main difference between Anycubic Kobra 2 Max and Sovol SV07 Plus?
Build volume (420x420x500mm vs 300x300x350mm) and print speed (500 vs 500 mm/s). The Anycubic Kobra 2 Max is best for large-prints; the Sovol SV07 Plus targets large-prints.