Hidden Gem
At a glance
Sovol · FDM (filament)
- Score
- 7/10
- Rank
- #46/51
- Build
- 31.5 L
- Speed
- 500 mm/s
- Layer
- 0.05 mm
The store sets the current price. Check it there before you buy.
Sovol SV07 Plus
- Scores 7 out of 10, #46 of 51 current FDM printers.
- 31.5 L of build space (300×300×350 mm), 1.5× the 21.6 L average.
- Best at value: 9/10, against an average of 8.5.
- The catch: Out-of-box calibration takes 2-3 hours for new users: this is not plug-and-play.
Specs from the PrintPick catalog, checked 2026-09-29. Scores are PrintPick ratings out of 10.
By Shadman Rahman · Prices checked
The verdict
Buy the SV07 Plus. 7/10, #46 of 51 FDM printers.
Good value if large-format and Klipper are both requirements. Put the setup time in and you'll get strong results. Impatient beginners should look at the Elegoo Neptune 4 Max or Artillery Sidewinder instead.
Why buy the SV07 Plus
- #10 of 51Top 10 FDM printers for value9/10 vs 8.5/10 average
- #10 of 51Top 10 FDM printers for build space31.5 L vs 21.6 L average
- #38 of 51Top 38 FDM printers for reliability7/10 vs 8.1/10 average
The numbers behind it
Right side is the average of the 51 current FDM printers we track. Teal wins the row.
SV07 PlusSovol · FDM
vsAverage51 FDM printers
| SV07 Plus | Spec | Average of 51 |
|---|---|---|
| 31.5 L (wins) | Build volume | 21.6 L |
| 500 mm/s (wins) | Top speed | 476 mm/s |
| 0.05 mm (wins) | Finest layer | 0.054 mm |
| 16.5 kg | Weight | 14.7 kg |
Scores out of 10
| SV07 Plus | Spec | Average of 51 |
|---|---|---|
| 9 (wins) | Value | 8.5 |
| 5 | Beginner | 7.4 (wins) |
| 7 | Print quality | 8.4 (wins) |
| 7 | Speed | 7.9 (wins) |
| 7 | Reliability | 8.1 (wins) |
| 7 | Overall | 8.1 (wins) |
Build space, front view, to one scale
- 300 × 300 × 350 mmSV07 Plus
- 450 × 450 × 470 mmCR-M4, largest current FDM
What owners say
300mm Klipper bed for [this price]. Sovol is quietly building great printers.
r/3DprintingAfter tuning, this thing prints great. Put in the setup time and you'll be rewarded.
Nero3D (YouTube)
Pros & Cons
Pros
- +300x300x350mm with Klipper: larger than the Artillery Sidewinder for less money
- +Pre-installed Klipper means proper input shaping at this bed size
- +Direct drive at 300mm scale is a feature most competitors skip
- +Sovol's Klipper configs are more complete out-of-box than most budget machines
Cons
- −Out-of-box calibration takes 2-3 hours for new users: this is not plug-and-play
- −Sovol community is small: you'll hit gaps in documentation when troubleshooting
- −Open frame at this bed size means ABS adhesion is a real challenge
Full specs
| Build volume | 300 × 300 × 350 mm |
|---|---|
| Layer resolution | 0.05 to 0.35 mm |
| Top speed | 500 mm/s |
| Weight | 16.5 kg |
| Type | FDM (filament) |
Features
- Klipper firmware
- Auto bed leveling
- Direct drive
- 300x300mm bed
- WiFi
- Large build
Buy these with it
A printer does nothing without these. Grab them in the same order.
- ELEGOO PLA filament, 1kgThe easy filament to start on. Prints at low temperatures and warps less.
- ELEGOO PETG filament, 1kgTougher and more heat tolerant than PLA, for parts that get handled or sit in the sun.
- SUNLU filament dryer S1 PlusWet filament causes stringing and rough surfaces. A dryer fixes that before you blame the printer.
Compare the SV07 Plus with (4)
Frequently Asked Questions
What is the build volume of the Sovol SV07 Plus?
The Sovol SV07 Plus has a build volume of 300 x 300 x 350 mm.
Is the Sovol SV07 Plus good for beginners?
The Sovol SV07 Plus scores 5/10 for beginner-friendliness. It's suitable for beginners with some patience.
What are the pros and cons of the Sovol SV07 Plus?
Pros: 300x300x350mm with Klipper: larger than the Artillery Sidewinder for less money. Pre-installed Klipper means proper input shaping at this bed size. Direct drive at 300mm scale is a feature most competitors skip. Sovol's Klipper configs are more complete out-of-box than most budget machines. Cons: Out-of-box calibration takes 2-3 hours for new users: this is not plug-and-play. Sovol community is small: you'll hit gaps in documentation when troubleshooting. Open frame at this bed size means ABS adhesion is a real challenge.
Also worth considering
fdmBambu Lab A1 Mini
Bambu Lab
9.2/10
Best Value
Bambu quality on a budget. Desk footprint small enough that it fits next to your monitor without crowding anything out.
Build
180mm
Speed
500mm/s
Layer
0.05mm
fdmBambu Lab A1
Bambu Lab
9.2/10
Best First Printer
The A1 without the AMS Lite. Full 256mm bed, full Bambu quality, single-color only.
Build
256mm
Speed
500mm/s
Layer
0.05mm
