Anycubic Kobra S1 ACE 2 Pro Combo vs Creality K2 Plus
Head-to-head 3D printer comparison, 2026
The Anycubic Kobra S1 ACE 2 Pro Combo and Creality K2 Plus are both FDM 3D printers competing in different tiers, $459 vs $899. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Anycubic Kobra S1 ACE 2 Pro Combo takes the crown with 8/10 vs 7.8/10. It pulls ahead in Value, Beginner Friendliness. The Creality K2 Plus still puts up a fight in Print Quality and Reliability.
Direct answer
Anycubic Kobra S1 ACE 2 Pro Combo is the better pick for most buyers.
Choose Anycubic Kobra S1 ACE 2 Pro Combo if you want the stronger overall score, better fit for multi-color and speed, and the safer recommendation. Choose Creality K2 Plus only if its specific strengths matter more to you than the overall result.
Winner by buyer type
Best overall
Anycubic Kobra S1 ACE 2 Pro Combo
Best value
Anycubic Kobra S1 ACE 2 Pro Combo
Best build volume
Creality K2 Plus
Score Breakdown
Specifications
| Spec | Anycubic Kobra S1 ACE 2 Pro Combo | Creality K2 Plus |
|---|---|---|
| Price | $459 | $899 |
| Type | FDM | FDM |
| Build Volume | 250 x 250 x 250 mm | 350 x 350 x 350 mm |
| Print Speed | 600 mm/s | 600 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 13 kg | 27 kg |
| Overall Score | 8/10 | 7.8/10 |
Pros & Cons
Anycubic Kobra S1 ACE 2 Pro Combo
+16-color capable (4 colors standard; 16 colors requires 4x ACE 2 Pro units purchased separately). Doubles the 8-color S1 Combo and quadruples the Bambu A1 Combo (4)
+Fully enclosed CoreXY handles ABS, ASA, and engineering filaments without warping
+44dB quiet mode is unusually low for a 600mm/s CoreXY — apartment-friendly
+Upgraded hotend is rated for the full Anycubic filament range
+Early bird €459 undercuts the Bambu P2S (€549) and matches pricing of the older 8-color S1 Combo
−Brand new product — early adopter risk on firmware and ACE 2 Pro reliability
−Anycubic slicer still trails Bambu Studio on automation and profile polish
−ACE 2 Pro adds significant desk footprint
−Early bird pricing ends May 31 — regular price expected to climb
Creality K2 Plus
+350mm enclosed cube: nothing else in the consumer space matches this volume at the price
+Multi-color CFS means you're not limited to single-filament on big jobs
+Active carbon filtration handles ABS fumes at this scale
+Independent dual Z keeps the bed level on a platform this large
−27kg means you set it up once and it stays there
−CFS adds setup complexity that single-color users don't need to pay for
−At $899, this is a commitment; make sure you need 350mm before buying
Who Should Buy Which?
Choose the Anycubic Kobra S1 ACE 2 Pro Combo if you want:
- A great printer for multi-color
- A great printer for speed
- A great printer for enclosed
- ACE 2 Pro multi-color system (up to 16 colors)
- Fully-enclosed CoreXY architecture
- Upgraded hotend (all-filament compatible)
Choose the Creality K2 Plus if you want:
- A great printer for large-prints
- A great printer for professional
- A great printer for multi-color
- Enclosed
- 350mm build volume
- CFS multi-color
Frequently Asked Questions
Is the Anycubic Kobra S1 ACE 2 Pro Combo better than the Creality K2 Plus?
By the numbers, the Anycubic Kobra S1 ACE 2 Pro Combo scores higher (8/10). But "better" depends on your use case, the Creality K2 Plus may be the smarter buy if you need large-prints.
Which is better for beginners, Anycubic Kobra S1 ACE 2 Pro Combo or Creality K2 Plus?
The Anycubic Kobra S1 ACE 2 Pro Combo is more beginner-friendly (7/10 vs 6/10) with easier setup and a gentler learning curve.
Is the Creality K2 Plus worth $440 more than the Anycubic Kobra S1 ACE 2 Pro Combo?
The Anycubic Kobra S1 ACE 2 Pro Combo actually scores higher (8/10) despite costing $440 less. The Creality K2 Plus only makes sense if you specifically need large-prints.
What's the main difference between Anycubic Kobra S1 ACE 2 Pro Combo and Creality K2 Plus?
Build volume (250x250x250mm vs 350x350x350mm) and print speed (600 vs 600 mm/s). The Anycubic Kobra S1 ACE 2 Pro Combo is best for multi-color; the Creality K2 Plus targets large-prints.