Bambu Lab A1 Combo
Best Black Friday Deal Overall
- Speed
- 500 mm/s
- Score
- 9.2/10
- Build
- 16.8 L
Buy Direct from Bambu Lab
The store sets the current price. Check it there before you buy.
Black Friday 3D Printer Deals 2026: What to Buy
- Best Black Friday Deal Overall: the Bambu Lab A1 Combo, 9.2/10.
- Best Deal Under $250: the Bambu Lab A1 Mini, 9.2/10.
- Best Enclosed Printer Deal: the Elegoo Centauri Carbon, 8.2/10.
- Best Multi-Color Deal Outside Bambu: the Anycubic Kobra S1 Combo, 8.2/10.
- Best Resin Printer Deal: the Elegoo Saturn 4 Ultra, 7.8/10.
- Best Deal for Tinkerers: the Creality Ender 3 V3 SE, 8/10.
listicle · updated . Specs from the PrintPick catalog, checked 2026-09-29. Scores are PrintPick ratings out of 10.
By Shadman Rahman · Prices checked
The verdict
Buy the A1 Combo. Best Black Friday Deal Overall.
If you only read one line: the A1 Combo is the Black Friday buy for most people, and the A1 Mini is the buy on a budget. Want an enclosure for tougher materials? The Centauri Carbon. Want multi-color without Bambu? The Kobra S1 Combo. Printing miniatures? The Saturn 4 Ultra. Prices change by the hour during sale week, so check the price on the button before you buy.
The short answer
Most people should get the Bambu Lab A1 Combo. On a tight budget, the A1 Mini.
The A1 Combo prints in four colors out of the box and has the most beginner-friendly software in the category. The A1 Mini is the same experience on a smaller bed for less money. Everything else on this list is a better fit for one specific job.
- Multi-color for most people: Bambu Lab A1 Combo. Check today's price at the Bambu Lab store.
- Under $250: Bambu Lab A1 Mini. Check today's price on Amazon.
- Enclosed on a budget: Elegoo Centauri Carbon, an enclosed CoreXY printer. Check today's price on Amazon or at Elegoo.
- Best resin deal: Elegoo Saturn 4 Ultra for miniatures. Check today's price on Amazon or at Elegoo.
- Tinkerer pick: Creality Ender 3 V3 SE. Check today's price on Amazon.
Elegoo Black Friday coupon codes
Elegoo's sitewide holiday codes work at the Elegoo store, not on Amazon. Pick the code that matches your cart total and enter it at checkout.
| Code | Discount | Minimum order |
|---|---|---|
SABF10 | $10 off | $150 |
SABF15 | $15 off | $250 |
SABF30 | $30 off | $300 |
SABF50 | $50 off | $500 |
SABF100 | $100 off | $2,000 |
Valid through December 25, 2026, Pacific time. Some products are excluded. Elegoo's checkout shows whether a code applies to your cart.
Shop the Elegoo storeThe 6 picks, by the numbers
Same scale within each chart. Teal is the best of the 6.
| A1 Combo | 9.2/10 (best) | |
|---|---|---|
| A1 Mini | 9.2/10 (best) | |
| Centauri Carbon | 8.2/10 | |
| Kobra S1 Combo | 8.2/10 | |
| Saturn 4 Ultra | 7.8/10 | |
| Ender 3 V3 SE | 8/10 |
| A1 Combo | 16.8 L (best) | |
|---|---|---|
| A1 Mini | 5.8 L | |
| Centauri Carbon | 16.8 L (best) | |
| Kobra S1 Combo | 16.3 L | |
| Saturn 4 Ultra | 5.9 L | |
| Ender 3 V3 SE | 12.1 L |
Black Friday is Friday, November 27, and Cyber Monday is November 30, but many 3D printer brands start their sales earlier. This page is the short list: one pick per budget and what each printer is best at. Rankings draw on owner reports across r/3Dprinting and r/BambuLab, independent long-form reviews, and the PrintPick scores for each printer. Prices change by the hour during sale week, so this page does not quote them. Use the button on each pick to see today's price, and use Elegoo's sitewide codes below if you buy from the Elegoo store.
Best Black Friday Deal Overall
- Speed
- 500 mm/s
- Score
- 9.2/10
- Build
- 16.8 L
The A1 Combo is the one most people should get. It ships with the AMS Lite, so four-color printing works on day one, and Bambu Studio has tuned profiles for every common filament. Owner reports put setup at about 15 minutes. The one real limit is the open frame: ABS and nylon warp without an enclosure, but PLA and PETG cover most of what new owners print. Bambu Lab sells the A1 Combo direct, so its button goes to the Bambu Lab store. Check today's price there before you buy.
Best Deal Under $250
- Speed
- 500 mm/s
- Score
- 9.2/10
- Build
- 5.8 L
The A1 Mini is the A1 experience on a 180mm bed. Same auto-calibration, same software, same print quality. For phone stands, figurines, cable clips and desk organizers, the smaller bed rarely matters. It is one of the best values in 3D printing even without a sale. Check today's price on Amazon before you buy. You can add the AMS Lite later if you want multi-color.
Best Enclosed Printer Deal
- Speed
- 500 mm/s
- Score
- 8.2/10
- Build
- 16.8 L
The Centauri Carbon is a fully enclosed CoreXY printer at an open-frame price. The enclosure matters if you want to print ABS, ASA or carbon-fiber blends, and it keeps fumes and noise down in a shared room. Owner reports are strong on print quality out of the box, and the main complaint is a less polished slicer than Bambu's. Check today's price on Amazon or at the Elegoo store, where the coupon codes on this page may lower it further.
Best Multi-Color Deal Outside Bambu
- Speed
- 600 mm/s
- Score
- 8.2/10
- Build
- 16.3 L
The Kobra S1 Combo is the pick if you want an enclosed multi-color printer and would rather not buy into Bambu's ecosystem. It is enclosed, fast, and the ACE Pro unit handles color changes automatically. Anycubic's software is less mature than Bambu Studio, which is the honest trade. Check today's price on Amazon. Readers in Europe can also buy it direct from Anycubic's EU store.
Best Resin Printer Deal
- Speed
- 150 mm/h
- Score
- 7.8/10
- Build
- 5.9 L
For miniatures, tabletop terrain and jewelry prototypes, resin beats any FDM printer on detail. The Saturn 4 Ultra has a 12K screen and a plate big enough to print a full squad in one run. Budget for a wash and cure station, gloves and a ventilated spot, because resin needs all three. Check today's price on Amazon or at the Elegoo store, and try the Elegoo codes on this page if you buy direct.
Best Deal for Tinkerers
- Speed
- 250 mm/s
- Score
- 8/10
- Build
- 12.1 L
The Ender 3 V3 SE is for the buyer who wants to understand how a printer works, not just press print. It has auto-leveling and direct drive, one of the biggest communities in 3D printing, and an almost endless upgrade path. Stock profiles need more tuning than Bambu's. Check today's price on Amazon. If the A1 Mini costs about the same on the day you buy, get the A1 Mini instead.
Still deciding between two?
These head-to-head pages settle the most common Black Friday matchups.
