Anycubic Kobra S1 ACE 2 Pro Combo vs Flashforge Adventurer 5M Pro
Head-to-head 3D printer comparison, 2026
The Anycubic Kobra S1 ACE 2 Pro Combo and Flashforge Adventurer 5M Pro are both FDM 3D printers competing in the same price bracket, $459 vs $379. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Flashforge Adventurer 5M Pro takes the crown with 8.6/10 vs 8/10. It pulls ahead in Beginner Friendliness, Reliability.
Direct answer
Flashforge Adventurer 5M Pro is the better pick for most buyers.
Choose Flashforge Adventurer 5M Pro if you want the stronger overall score, better fit for beginners and enclosed, and the safer recommendation. Choose Anycubic Kobra S1 ACE 2 Pro Combo only if its specific strengths matter more to you than the overall result.
Winner by buyer type
Best overall
Flashforge Adventurer 5M Pro
Best value
Flashforge Adventurer 5M Pro
Best build volume
Anycubic Kobra S1 ACE 2 Pro Combo
Score Breakdown
Specifications
| Spec | Anycubic Kobra S1 ACE 2 Pro Combo | Flashforge Adventurer 5M Pro |
|---|---|---|
| Price | $459 | $379 |
| Type | FDM | FDM |
| Build Volume | 250 x 250 x 250 mm | 220 x 220 x 220 mm |
| Print Speed | 600 mm/s | 600 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 13 kg | 12.5 kg |
| Overall Score | 8/10 | 8.6/10 |
Pros & Cons
Anycubic Kobra S1 ACE 2 Pro Combo
+16-color capable (4 colors standard; 16 colors requires 4x ACE 2 Pro units purchased separately). Doubles the 8-color S1 Combo and quadruples the Bambu A1 Combo (4)
+Fully enclosed CoreXY handles ABS, ASA, and engineering filaments without warping
+44dB quiet mode is unusually low for a 600mm/s CoreXY — apartment-friendly
+Upgraded hotend is rated for the full Anycubic filament range
+Early bird €459 undercuts the Bambu P2S (€549) and matches pricing of the older 8-color S1 Combo
−Brand new product — early adopter risk on firmware and ACE 2 Pro reliability
−Anycubic slicer still trails Bambu Studio on automation and profile polish
−ACE 2 Pro adds significant desk footprint
−Early bird pricing ends May 31 — regular price expected to climb
Flashforge Adventurer 5M Pro
+HEPA filter and enclosure at $379 is genuinely rare in this class
+Nozzle swaps with no tools: pull out, push in, done in 30 seconds
+600mm/s means speed doesn't suffer for the enclosure premium
+ABS prints more reliably than any open-frame machine at this price
−220x220mm build volume is cramped compared to open-frame rivals
−Proprietary nozzles mean you can't raid a generic nozzle pack
−Flashforge's community is small: if something breaks, you're often on your own
Who Should Buy Which?
Choose the Anycubic Kobra S1 ACE 2 Pro Combo if you want:
- A great printer for multi-color
- A great printer for speed
- A great printer for enclosed
- ACE 2 Pro multi-color system (up to 16 colors)
- Fully-enclosed CoreXY architecture
- Upgraded hotend (all-filament compatible)
Choose the Flashforge Adventurer 5M Pro if you want:
- A great printer for beginners
- A great printer for enclosed
- A great printer for speed
- Enclosed
- Auto leveling
- Quick-swap nozzle
Frequently Asked Questions
Is the Anycubic Kobra S1 ACE 2 Pro Combo better than the Flashforge Adventurer 5M Pro?
By the numbers, the Flashforge Adventurer 5M Pro scores higher (8.6/10). But "better" depends on your use case, the Anycubic Kobra S1 ACE 2 Pro Combo may be the smarter buy if you need multi-color.
Which is better for beginners, Anycubic Kobra S1 ACE 2 Pro Combo or Flashforge Adventurer 5M Pro?
The Flashforge Adventurer 5M Pro is more beginner-friendly (9/10 vs 7/10) with easier setup and a gentler learning curve.
Is the Anycubic Kobra S1 ACE 2 Pro Combo worth $80 more than the Flashforge Adventurer 5M Pro?
The Flashforge Adventurer 5M Pro actually scores higher (8.6/10) despite costing $80 less. The Anycubic Kobra S1 ACE 2 Pro Combo only makes sense if you specifically need multi-color.
What's the main difference between Anycubic Kobra S1 ACE 2 Pro Combo and Flashforge Adventurer 5M Pro?
Build volume (250x250x250mm vs 220x220x220mm) and print speed (600 vs 600 mm/s). The Anycubic Kobra S1 ACE 2 Pro Combo is best for multi-color; the Flashforge Adventurer 5M Pro targets beginners.