Anycubic Photon Mono 4 vs Sovol SV07 Plus
Head-to-head 3D printer comparison — 2026
Comparing FDM to resin? The Anycubic Photon Mono 4 ($159, RESIN) and Sovol SV07 Plus ($339, FDM) use fundamentally different technologies. FDM melts filament layer by layer; resin cures liquid with UV light. Here's how they stack up.
Our Verdict
The Anycubic Photon Mono 4 takes the crown with 7.4/10 vs 7/10. It pulls ahead in Value, Beginner Friendliness, Print Quality. The Sovol SV07 Plus still puts up a fight in Speed.
Score Breakdown
Specifications
| Spec | Anycubic Photon Mono 4 | Sovol SV07 Plus |
|---|---|---|
| Price | $159 | $339 |
| Type | RESIN | FDM |
| Build Volume | 134 x 75 x 130 mm | 300 x 300 x 350 mm |
| Print Speed | 100 mm/s | 500 mm/s |
| Min Resolution | 0.01 mm | 0.05 mm |
| Weight | 5 kg | 16.5 kg |
| Overall Score | 7.4/10 | 7/10 |
Pros & Cons
Anycubic Photon Mono 4
+Cheapest high-detail resin printer
+10K resolution
+Compact
+Low entry cost
−Very small build plate
−No WiFi
−USB-only
−Slow compared to newer models
Sovol SV07 Plus
+300x300x350mm at $339
+Klipper pre-installed
+Good for tinkerers
+Direct drive at this size
−Requires calibration out of box
−Community smaller than Creality/Bambu
−Open frame only
Who Should Buy Which?
Choose the Anycubic Photon Mono 4 if you want:
- A great printer for miniatures
- A great printer for resin
- A great printer for budget
- 10K mono LCD
- Laser-cut build plate
- USB
Choose the Sovol SV07 Plus if you want:
- A great printer for large-prints
- A great printer for budget
- A great printer for diy
- Klipper firmware
- Auto bed leveling
- Direct drive
Frequently Asked Questions
Is the Anycubic Photon Mono 4 better than the Sovol SV07 Plus?
By the numbers, the Anycubic Photon Mono 4 scores higher (7.4/10). But "better" depends on your use case — the Sovol SV07 Plus may be the smarter buy if you need large-prints.
Which is better for beginners, Anycubic Photon Mono 4 or Sovol SV07 Plus?
The Anycubic Photon Mono 4 is more beginner-friendly (6/10 vs 5/10) with easier setup and a gentler learning curve.
Is the Sovol SV07 Plus worth $180 more than the Anycubic Photon Mono 4?
The Anycubic Photon Mono 4 actually scores higher (7.4/10) despite costing $180 less. The Sovol SV07 Plus only makes sense if you specifically need large-prints.
What's the main difference between Anycubic Photon Mono 4 and Sovol SV07 Plus?
Technology: the Anycubic Photon Mono 4 is RESIN (filament) and the Sovol SV07 Plus is FDM (resin). FDM prints bigger functional parts; resin delivers finer surface detail.