Artillery Sidewinder X4 Plus vs Sovol SV07 Plus
Head-to-head 3D printer comparison, 2026
The Artillery Sidewinder X4 Plus and Sovol SV07 Plus are both FDM 3D printers competing in the same price bracket, $349 vs $339. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Artillery Sidewinder X4 Plus takes the crown with 7.4/10 vs 7/10. It pulls ahead in Beginner Friendliness, Speed. That said, the Sovol SV07 Plus saves you $10.
Score Breakdown
Specifications
| Spec | Artillery Sidewinder X4 Plus | Sovol SV07 Plus |
|---|---|---|
| Price | $349 | $339 |
| Type | FDM | FDM |
| Build Volume | 300 x 300 x 400 mm | 300 x 300 x 350 mm |
| Print Speed | 500 mm/s | 500 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 14.5 kg | 16.5 kg |
| Overall Score | 7.4/10 | 7/10 |
Pros & Cons
Artillery Sidewinder X4 Plus
+300x300x400mm at $349: the price-per-cubic-millimeter is absurd
+Klipper pre-installed with room to tune
+Direct drive handles TPU and flexible materials at this large scale
+Prints armor plates and large props without slicing and gluing
−QC varies batch to batch: some users get great units, some need calibration work
−Artillery's community is thin compared to Creality or Elegoo
−Gets audibly loud pushing 500mm/s; this is a workshop printer, not a bedroom one
Sovol SV07 Plus
+300x300x350mm with Klipper for $339: larger than the Artillery Sidewinder for less money
+Pre-installed Klipper means proper input shaping at this bed size
+Direct drive at 300mm scale is a feature most competitors skip
+Sovol's Klipper configs are more complete out-of-box than most budget machines
−Out-of-box calibration takes 2-3 hours for new users: this is not plug-and-play
−Sovol community is small: you'll hit gaps in documentation when troubleshooting
−Open frame at this bed size means ABS adhesion is a real challenge
Who Should Buy Which?
Choose the Artillery Sidewinder X4 Plus if you want:
- A great printer for large-prints
- A great printer for budget
- A great printer for speed
- 300x300x400mm build
- Klipper
- Auto bed leveling
Choose the Sovol SV07 Plus if you want:
- A great printer for large-prints
- A great printer for budget
- A great printer for diy
- Klipper firmware
- Auto bed leveling
- Direct drive
Frequently Asked Questions
Is the Artillery Sidewinder X4 Plus better than the Sovol SV07 Plus?
By the numbers, the Artillery Sidewinder X4 Plus scores higher (7.4/10). But "better" depends on your use case, the Sovol SV07 Plus may be the smarter buy if you need large-prints.
Which is better for beginners, Artillery Sidewinder X4 Plus or Sovol SV07 Plus?
The Artillery Sidewinder X4 Plus is more beginner-friendly (6/10 vs 5/10) with easier setup and a gentler learning curve.
Is the Artillery Sidewinder X4 Plus worth $10 more than the Sovol SV07 Plus?
The Artillery Sidewinder X4 Plus scores higher overall (7.4/10 vs 7/10). The extra $10 gets you 300x300x400mm at $349: the price-per-cubic-millimeter is absurd.
What's the main difference between Artillery Sidewinder X4 Plus and Sovol SV07 Plus?
Build volume (300x300x400mm vs 300x300x350mm) and print speed (500 vs 500 mm/s). The Artillery Sidewinder X4 Plus is best for large-prints; the Sovol SV07 Plus targets large-prints.