PrintPick earns a commission when you buy through store links on this site. It does not change the price you pay or which printer wins.

Bambu Lab P1S vs Flashforge Adventurer 5M

  • The Bambu Lab P1S wins, 9 vs 8.6 out of 10.
  • P1S prints 1.6× the volume (256³ ÷ 220³ = 1.58) for more money.
  • Adventurer 5M is faster, 600 vs 500 mm/s.
  • Pick the Adventurer 5M if your prints fit in 22 cm.

Specs from the PrintPick catalog, checked 2026-09-29. Scores are PrintPick ratings out of 10.

The verdict

Buy the P1S.

9/10 vs Adventurer 5M's 8.6/10, and it wins 2 of 5 categories. Buy this if you print ABS, ASA, or anything that smells or warps in open air. The enclosure and filtration aren't optional extras, they're the whole point. If you only print PLA, save some money and get the A1 Combo.

Specs, side by side

Teal wins the row.

P1SBambu Lab · FDM
vs
Adventurer 5MFlashforge · FDM
P1S and Adventurer 5M compared: specs
P1SSpecAdventurer 5M
16.8 L (wins)Build volume10.6 L
500 mm/sTop speed600 mm/s (wins)
0.05 mmFinest layer0.05 mm
14.13 kgWeight11 kg

Features

✓ listed for that printer. – not listed, which does not mean it is missing.

Features of the P1S and Adventurer 5M
P1SFeatureAdventurer 5M
ListedEnclosedListed
ListedMulti-material (AMS)Not listed
ListedWiFiNot listed
ListedCameraNot listed
ListedHEPA filterListed
ListedActive chamber heatingNot listed
Not listedAuto levelingListed
Not listedQuick-swap nozzleListed
Not listed600mm/s speedListed

Scores out of 10

P1S and Adventurer 5M compared: PrintPick scores out of 10
P1SSpecAdventurer 5M
8Value9 (wins)
8Beginner Friendliness9 (wins)
10 (wins)Print Quality8
9Speed9
10 (wins)Reliability8
9 (wins)Overall8.6

Build space, front view, to one scale

  • 256 × 256 × 256 mm
  • 220 × 220 × 220 mm

What sets these two apart

The widest gap is Print Quality: the Bambu Lab P1S scores 10 against 8 for the Flashforge Adventurer 5M, a 2-point lead. The Bambu Lab P1S has the larger build volume, 256 x 256 x 256mm against 220 x 220 x 220mm, or 58% more space. The Flashforge Adventurer 5M lists a top speed of 600 mm/s against 500 mm/s.

Pros & Cons

P1S

  • +HEPA filter actually handles ABS fumes, not just PLA smell
  • +CoreXY at 500mm/s inside an enclosed chamber
  • +Reliability track record is as good as anything at this price
  • −Sold without AMS, which adds another $100-150 on top
  • −Enclosure lid has to come off to reach prints mid-job

Adventurer 5M

  • +Enclosed with HEPA filter: cheaper than the Pro version with the same key features
  • +Toolless nozzle swap takes 30 seconds: pull the module out, snap the new one in
  • +600mm/s inside an enclosure is faster than most open-frame budget machines
  • −220mm cube is smaller than open-frame rivals at this price
  • −Proprietary nozzle modules: you can't use standard 0.4mm nozzles

Frequently Asked Questions

Is the Bambu Lab P1S better than the Flashforge Adventurer 5M?

By the numbers, the Bambu Lab P1S scores higher (9/10). But "better" depends on your use case, the Flashforge Adventurer 5M may be the smarter buy if you need enclosed.

Which is better for beginners, Bambu Lab P1S or Flashforge Adventurer 5M?

The Flashforge Adventurer 5M is more beginner-friendly (9/10 vs 8/10) with easier setup and a gentler learning curve.

Is the Bambu Lab P1S worth paying more for over the Flashforge Adventurer 5M?

The Bambu Lab P1S scores higher overall (9/10 vs 8.6/10). The extra money gets you hepa filter actually handles abs fumes, not just pla smell.

What's the main difference between Bambu Lab P1S and Flashforge Adventurer 5M?

Build volume (256x256x256mm vs 220x220x220mm) and print speed (500 vs 600 mm/s). The Bambu Lab P1S is best for engineering; the Flashforge Adventurer 5M targets enclosed.

Related Comparisons