Elegoo Jupiter SE vs Elegoo Neptune 4 Plus
Head-to-head 3D printer comparison, 2026
Choosing between two Elegoo printers? The Elegoo Jupiter SE ($340) and Elegoo Neptune 4 Plus ($299) both come from one of the most trusted names in 3D printing, with a $41 gap between them. Here's how they compare across every category that matters.
Our Verdict
The Elegoo Neptune 4 Plus takes the crown with 8.4/10 vs 7.8/10. It pulls ahead in Value, Beginner Friendliness, Speed. The Elegoo Jupiter SE still puts up a fight in Print Quality.
Score Breakdown
Specifications
| Spec | Elegoo Jupiter SE | Elegoo Neptune 4 Plus |
|---|---|---|
| Price | $340 | $299 |
| Type | RESIN | FDM |
| Build Volume | 277 x 156 x 300 mm | 320 x 320 x 385 mm |
| Print Speed | 70 mm/s | 500 mm/s |
| Min Resolution | 0.01 mm | 0.05 mm |
| Weight | 18 kg | 12.5 kg |
| Overall Score | 7.8/10 | 8.4/10 |
Pros & Cons
Elegoo Jupiter SE
+277mm wide platform prints full-size miniature armies or large costume props in one run
+12.8-inch 6K mono screen gives better per-pixel resolution than smaller 8.9-inch screens
+COB light source delivers more even illumination across the full platform vs edge-to-edge LED arrays
+Tilt release reduces print-failure rate on large cross-sections
−18kg machine: this is a semi-permanent desk fixture, not something you move around
−Large FEP sheets cost more to replace and are harder to swap than smaller printer FEPs
−Resin handling requires PPE and ventilation regardless of size; a large vat means more resin exposure risk
−Steep beginner learning curve: hollow supports and drainage holes are mandatory at this scale
Elegoo Neptune 4 Plus
+320×320×385mm at $299 — the largest build volume at this price point
+Stock Klipper means real input shaping, pressure advance, and Moonraker API access
+Direct-drive handles TPU and flexible filaments without clog risk
+Mainsail interface enables remote monitoring and print farm integration
+Dual Z-axis prevents gantry sag on tall prints
−Open-frame limits material compatibility — ABS/ASA require an enclosure
−500mm/s achievable but optimal quality typically at 200-300mm/s
−Large bed means longer homing and leveling cycles
−Elegoo's support and community is smaller than Creality's
Who Should Buy Which?
Choose the Elegoo Jupiter SE if you want:
- A great printer for large-prints
- A great printer for resin
- A great printer for miniatures
- A great printer for professional
- 12.8-inch 6K mono LCD screen
- 277x156x300mm build volume
- COB mono light source (60,000-hour lifespan)
Choose the Elegoo Neptune 4 Plus if you want:
- A great printer for large-format
- A great printer for value
- A great printer for beginner
- A great printer for speed
- Stock Klipper firmware with Mainsail web interface
- 320×320×385mm XL build volume
- 500mm/s max print speed with input shaping
Frequently Asked Questions
Is the Elegoo Jupiter SE better than the Elegoo Neptune 4 Plus?
By the numbers, the Elegoo Neptune 4 Plus scores higher (8.4/10). But "better" depends on your use case, the Elegoo Jupiter SE may be the smarter buy if you need large-prints.
Which is better for beginners, Elegoo Jupiter SE or Elegoo Neptune 4 Plus?
The Elegoo Neptune 4 Plus is more beginner-friendly (8/10 vs 6/10) with easier setup and a gentler learning curve.
Is the Elegoo Jupiter SE worth $41 more than the Elegoo Neptune 4 Plus?
The Elegoo Neptune 4 Plus actually scores higher (8.4/10) despite costing $41 less. The Elegoo Jupiter SE only makes sense if you specifically need large-prints.
What's the main difference between Elegoo Jupiter SE and Elegoo Neptune 4 Plus?
Technology: the Elegoo Jupiter SE is RESIN (filament) and the Elegoo Neptune 4 Plus is FDM (resin). FDM prints bigger functional parts; resin delivers finer surface detail.