Elegoo Jupiter SE vs Sovol SV07 Plus
Head-to-head 3D printer comparison, 2026
Comparing FDM to resin? The Elegoo Jupiter SE ($340, RESIN) and Sovol SV07 Plus ($339, FDM) use fundamentally different technologies. FDM melts filament layer by layer; resin cures liquid with UV light. Here's how they stack up.
Our Verdict
The Elegoo Jupiter SE takes the crown with 7.8/10 vs 7/10. It pulls ahead in Beginner Friendliness, Print Quality, Reliability. That said, the Sovol SV07 Plus saves you $1 and wins on Value.
Score Breakdown
Specifications
| Spec | Elegoo Jupiter SE | Sovol SV07 Plus |
|---|---|---|
| Price | $340 | $339 |
| Type | RESIN | FDM |
| Build Volume | 277 x 156 x 300 mm | 300 x 300 x 350 mm |
| Print Speed | 70 mm/s | 500 mm/s |
| Min Resolution | 0.01 mm | 0.05 mm |
| Weight | 18 kg | 16.5 kg |
| Overall Score | 7.8/10 | 7/10 |
Pros & Cons
Elegoo Jupiter SE
+277mm wide platform prints full-size miniature armies or large costume props in one run
+12.8-inch 6K mono screen gives better per-pixel resolution than smaller 8.9-inch screens
+COB light source delivers more even illumination across the full platform vs edge-to-edge LED arrays
+Tilt release reduces print-failure rate on large cross-sections
−18kg machine: this is a semi-permanent desk fixture, not something you move around
−Large FEP sheets cost more to replace and are harder to swap than smaller printer FEPs
−Resin handling requires PPE and ventilation regardless of size; a large vat means more resin exposure risk
−Steep beginner learning curve: hollow supports and drainage holes are mandatory at this scale
Sovol SV07 Plus
+300x300x350mm with Klipper for $339: larger than the Artillery Sidewinder for less money
+Pre-installed Klipper means proper input shaping at this bed size
+Direct drive at 300mm scale is a feature most competitors skip
+Sovol's Klipper configs are more complete out-of-box than most budget machines
−Out-of-box calibration takes 2-3 hours for new users: this is not plug-and-play
−Sovol community is small: you'll hit gaps in documentation when troubleshooting
−Open frame at this bed size means ABS adhesion is a real challenge
Who Should Buy Which?
Choose the Elegoo Jupiter SE if you want:
- A great printer for large-prints
- A great printer for resin
- A great printer for miniatures
- A great printer for professional
- 12.8-inch 6K mono LCD screen
- 277x156x300mm build volume
- COB mono light source (60,000-hour lifespan)
Choose the Sovol SV07 Plus if you want:
- A great printer for large-prints
- A great printer for budget
- A great printer for diy
- Klipper firmware
- Auto bed leveling
- Direct drive
Frequently Asked Questions
Is the Elegoo Jupiter SE better than the Sovol SV07 Plus?
By the numbers, the Elegoo Jupiter SE scores higher (7.8/10). But "better" depends on your use case, the Sovol SV07 Plus may be the smarter buy if you need large-prints.
Which is better for beginners, Elegoo Jupiter SE or Sovol SV07 Plus?
The Elegoo Jupiter SE is more beginner-friendly (6/10 vs 5/10) with easier setup and a gentler learning curve.
Is the Elegoo Jupiter SE worth $1 more than the Sovol SV07 Plus?
The Elegoo Jupiter SE scores higher overall (7.8/10 vs 7/10). The extra $1 gets you 277mm wide platform prints full-size miniature armies or large costume props in one run.
What's the main difference between Elegoo Jupiter SE and Sovol SV07 Plus?
Technology: the Elegoo Jupiter SE is RESIN (filament) and the Sovol SV07 Plus is FDM (resin). FDM prints bigger functional parts; resin delivers finer surface detail.