
Prusa Core One
- Speed
- 500 mm/s
- Score
- 8.2/10
- Wins
- 4/5
Specs from the PrintPick catalog, checked 2026-09-29. Scores are PrintPick ratings out of 10.


Buy the Prusa Core One.
8.2/10 vs SV06 Plus's 7.2/10, and it wins 4 of 5 categories. Outstanding print quality and the best support in the business. The price premium is real, though. If you don't care about the Prusa ecosystem specifically, there are better deals. If you do, it's worth every krona.
Teal wins the row.
| Prusa Core One | Spec | SV06 Plus |
|---|---|---|
| 14.8 L | Build volume | 30.6 L (wins) |
| 500 mm/s (wins) | Top speed | 250 mm/s |
| 0.05 mm | Finest layer | 0.05 mm |
| 22.5 kg | Weight | 12 kg |
| Prusa Core One | Feature | SV06 Plus |
|---|---|---|
| Yes | Enclosed CoreXY with active chamber heating (55C) | No |
| Yes | Nextruder direct drive (10:1 planetary) | No |
| Yes | 360-degree cooling duct | No |
| Yes | Ethernet + WiFi + NFC | No |
| Yes | MMU3 multi-material compatible | No |
| Yes | Open-source firmware (PrusaSlicer) | No |
| No | All-metal direct drive | Yes |
| No | Auto bed leveling | Yes |
| No | PEI build plate | Yes |
| No | 300x300mm bed | Yes |
| No | Linear rails | Yes |
| Prusa Core One | Spec | SV06 Plus |
|---|---|---|
| 6 | Value | 9 (wins) |
| 7 (wins) | Beginner Friendliness | 6 |
| 10 (wins) | Print Quality | 8 |
| 8 (wins) | Speed | 5 |
| 10 (wins) | Reliability | 8 |
| 8.2 (wins) | Overall | 7.2 |
The widest gap is Value: the Sovol SV06 Plus scores 9 against 6 for the Prusa Core One, a 3-point lead. The Sovol SV06 Plus has the larger build volume, 300 x 300 x 340mm against 250 x 220 x 270mm, or 106% more space. The Prusa Core One lists a top speed of 500 mm/s against 250 mm/s.
Finally, Prusa takes on Bambu! The Core One is better in a box.Prusa Core One owner, Tom's Hardware
Rail smoothness holds up well after months of hard use, minimal belt wear, and consistent chamber heat stability.Prusa Core One owner, Prusa Forum
If you value open source and lifetime support, Prusa is still the gold standard. Just bring your wallet.Prusa Core One owner, r/3Dprinting
300mm bed and linear rails for [this price] is almost too good to be true. It's not.SV06 Plus owner, r/3Dprinting
Solid Ender 3 alternative if you need more bed real estate. Sovol did the job right.SV06 Plus owner, 3DPrintBeginner (YouTube)
A printer does nothing without these. Grab them in the same order.
By the numbers, the Prusa Core One scores higher (8.2/10). But "better" depends on your use case, the Sovol SV06 Plus may be the smarter buy if you need large-prints.
The Prusa Core One is more beginner-friendly (7/10 vs 6/10) with easier setup and a gentler learning curve.
The Prusa Core One scores higher overall (8.2/10 vs 7.2/10). The extra money gets you prusa reliability is not marketing. it's earned over years..
Build volume (250x220x270mm vs 300x300x340mm) and print speed (500 vs 250 mm/s). The Prusa Core One is best for precision; the Sovol SV06 Plus targets large-prints.