Anycubic Kobra 2 Max vs QIDI X-Plus 3
Head-to-head 3D printer comparison, 2026
The Anycubic Kobra 2 Max and QIDI X-Plus 3 are both FDM 3D printers competing in different tiers, $399 vs $499. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The QIDI X-Plus 3 takes the crown with 8.4/10 vs 7/10. It pulls ahead in Beginner Friendliness, Print Quality, Speed, Reliability. That said, the Anycubic Kobra 2 Max saves you $100.
Score Breakdown
Specifications
| Spec | Anycubic Kobra 2 Max | QIDI X-Plus 3 |
|---|---|---|
| Price | $399 | $499 |
| Type | FDM | FDM |
| Build Volume | 420 x 420 x 500 mm | 280 x 280 x 270 mm |
| Print Speed | 500 mm/s | 600 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 20.5 kg | 17 kg |
| Overall Score | 7/10 | 8.4/10 |
Pros & Cons
Anycubic Kobra 2 Max
+420x420x500mm for $399 is the largest bed you'll find at this budget
+Direct drive at this scale handles flexible filament when needed
+WiFi means you're not walking over with a USB stick for every job
−Open frame on a 420mm heated bed means serious adhesion prep is mandatory
−Full bed heating at this size takes 10+ minutes to reach temp
−Discontinued: Anycubic no longer supports this model
QIDI X-Plus 3
+60C active chamber heating is the real feature: ABS stops warping, Nylon actually sticks
+Handles PA, PC, and carbon-fiber composites without drama
+CoreXY at 600mm/s inside a heated enclosure is genuinely rare under $600
+280mm build volume is larger than most enclosed competitors at this price
−QIDI's slicer software feels like 2020: functional but not pleasant
−Community is small; problems require more DIY solving than Bambu or Creality
−Some components are proprietary, which makes upgrades harder
Who Should Buy Which?
Choose the Anycubic Kobra 2 Max if you want:
- A great printer for large-prints
- A great printer for cosplay
- A great printer for budget
- 420x420x500mm build
- Auto bed leveling
- Direct drive
Choose the QIDI X-Plus 3 if you want:
- A great printer for engineering
- A great printer for abs
- A great printer for enclosed
- A great printer for speed
- Enclosed
- CoreXY
- Chamber heating (60C)
Frequently Asked Questions
Is the Anycubic Kobra 2 Max better than the QIDI X-Plus 3?
By the numbers, the QIDI X-Plus 3 scores higher (8.4/10). But "better" depends on your use case, the Anycubic Kobra 2 Max may be the smarter buy if you need large-prints.
Which is better for beginners, Anycubic Kobra 2 Max or QIDI X-Plus 3?
The QIDI X-Plus 3 is more beginner-friendly (7/10 vs 5/10) with easier setup and a gentler learning curve.
Is the QIDI X-Plus 3 worth $100 more than the Anycubic Kobra 2 Max?
The QIDI X-Plus 3 scores higher overall (8.4/10 vs 7/10). The extra $100 gets you 60c active chamber heating is the real feature: abs stops warping, nylon actually sticks.
What's the main difference between Anycubic Kobra 2 Max and QIDI X-Plus 3?
Build volume (420x420x500mm vs 280x280x270mm) and print speed (500 vs 600 mm/s). The Anycubic Kobra 2 Max is best for large-prints; the QIDI X-Plus 3 targets engineering.