Hidden GemBest Value
At a glance
QIDI · FDM (filament)
- Score
- 8.4/10
- Rank
- #15/51
- Build
- 21.2 L
- Speed
- 600 mm/s
- Layer
- 0.05 mm
Buy at brand store
The store sets the current price. Check it there before you buy.
QIDI X-Plus 3
QIDI X-Plus 3
- Scores 8.4 out of 10, #15 of 51 current FDM printers.
- 21.2 L of build space (280×280×270 mm), 1.0× the 21.6 L average.
- Best at value: 9/10, against an average of 8.5.
- The catch: QIDI's slicer software feels like 2020: functional but not pleasant.
Specs from the PrintPick catalog, checked 2026-09-29. Scores are PrintPick ratings out of 10.
By Shadman Rahman · Prices checked
The verdict
Buy the X-Plus 3. 8.4/10, #15 of 51 FDM printers.
This is the printer for ABS and Nylon at a price that doesn't hurt. The chamber heating is the feature: everything else at this price is warping-mitigation theater. If you're printing PLA only, look elsewhere. If ABS is part of your workflow, look here first.
Why buy the X-Plus 3
- #6 of 51Top 6 FDM printers for speed9/10 vs 7.9/10 average
- #10 of 51Top 10 FDM printers for value9/10 vs 8.5/10 average
- #10 of 51Top 10 FDM printers for print quality9/10 vs 8.4/10 average
The numbers behind it
Right side is the average of the 51 current FDM printers we track. Teal wins the row.
X-Plus 3QIDI · FDM
vsAverage51 FDM printers
| X-Plus 3 | Spec | Average of 51 |
|---|---|---|
| 21.2 L | Build volume | 21.6 L (wins) |
| 600 mm/s (wins) | Top speed | 476 mm/s |
| 0.05 mm (wins) | Finest layer | 0.054 mm |
| 17.0 kg | Weight | 14.7 kg |
Scores out of 10
| X-Plus 3 | Spec | Average of 51 |
|---|---|---|
| 9 (wins) | Value | 8.5 |
| 7 | Beginner | 7.4 (wins) |
| 9 (wins) | Print quality | 8.4 |
| 9 (wins) | Speed | 7.9 |
| 8 | Reliability | 8.1 (wins) |
| 8.4 (wins) | Overall | 8.1 |
Build space, front view, to one scale
- 280 × 280 × 270 mmX-Plus 3
- 450 × 450 × 470 mmCR-M4, largest current FDM
What owners say
Active chamber heating to 60C at this price? QIDI is quietly winning the enclosed printer game.
r/3DprintingThe X-Plus 3 handles Nylon and PC better than printers costing twice as much.
Edge of Tech (YouTube)
Pros & Cons
Pros
- +60C active chamber heating is the real feature: ABS stops warping, Nylon actually sticks
- +Handles PA, PC, and carbon-fiber composites without drama
- +CoreXY at 600mm/s inside a heated enclosure is genuinely rare under $600
- +280mm build volume is larger than most enclosed competitors at this price
Cons
- −QIDI's slicer software feels like 2020: functional but not pleasant
- −Community is small; problems require more DIY solving than Bambu or Creality
- −Some components are proprietary, which makes upgrades harder
Full specs
| Build volume | 280 × 280 × 270 mm |
|---|---|
| Layer resolution | 0.05 to 0.35 mm |
| Top speed | 600 mm/s |
| Weight | 17 kg |
| Type | FDM (filament) |
Features
- Enclosed
- CoreXY
- Chamber heating (60C)
- Auto bed leveling
- WiFi
- Camera
Buy these with it
A printer does nothing without these. Grab them in the same order.
- ELEGOO PLA filament, 1kgThe easy filament to start on. Prints at low temperatures and warps less.
- ELEGOO PETG filament, 1kgTougher and more heat tolerant than PLA, for parts that get handled or sit in the sun.
- SUNLU filament dryer S1 PlusWet filament causes stringing and rough surfaces. A dryer fixes that before you blame the printer.
In our guides (4)
Where the X-Plus 3 makes the cut, and what it beats.
Compare the X-Plus 3 with (6)
Frequently Asked Questions
What is the build volume of the QIDI X-Plus 3?
The QIDI X-Plus 3 has a build volume of 280 x 280 x 270 mm.
Is the QIDI X-Plus 3 good for beginners?
The QIDI X-Plus 3 scores 7/10 for beginner-friendliness. It's a great choice for beginners.
What are the pros and cons of the QIDI X-Plus 3?
Pros: 60C active chamber heating is the real feature: ABS stops warping, Nylon actually sticks. Handles PA, PC, and carbon-fiber composites without drama. CoreXY at 600mm/s inside a heated enclosure is genuinely rare under $600. 280mm build volume is larger than most enclosed competitors at this price. Cons: QIDI's slicer software feels like 2020: functional but not pleasant. Community is small; problems require more DIY solving than Bambu or Creality. Some components are proprietary, which makes upgrades harder.
Also worth considering
fdmBambu Lab P2S
Bambu Lab
9.2/10
Reddit Favorite
P1S replaced by a meaningfully better machine for a little more. Quick-swap nozzles, 5-inch touchscreen, 1080p AI camera, AMS 2 Pro compatibility.
Build
256mm
Speed
500mm/s
Layer
0.05mm
fdmBambu Lab A1 Combo
Bambu Lab
9.2/10
Reddit Favorite
Multi-color printing out of the box, reliable enough for beginners, fast enough for anyone who's tired of watching a print head crawl.
Build
256mm
Speed
500mm/s
Layer
0.05mm
