Artillery Sidewinder X4 Plus vs QIDI X-Plus 3
Head-to-head 3D printer comparison, 2026
The Artillery Sidewinder X4 Plus and QIDI X-Plus 3 are both FDM 3D printers competing in different tiers, $349 vs $499. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The QIDI X-Plus 3 takes the crown with 8.4/10 vs 7.4/10. It pulls ahead in Beginner Friendliness, Print Quality, Speed, Reliability. That said, the Artillery Sidewinder X4 Plus saves you $150.
Score Breakdown
Specifications
| Spec | Artillery Sidewinder X4 Plus | QIDI X-Plus 3 |
|---|---|---|
| Price | $349 | $499 |
| Type | FDM | FDM |
| Build Volume | 300 x 300 x 400 mm | 280 x 280 x 270 mm |
| Print Speed | 500 mm/s | 600 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 14.5 kg | 17 kg |
| Overall Score | 7.4/10 | 8.4/10 |
Pros & Cons
Artillery Sidewinder X4 Plus
+300x300x400mm at $349: the price-per-cubic-millimeter is absurd
+Klipper pre-installed with room to tune
+Direct drive handles TPU and flexible materials at this large scale
+Prints armor plates and large props without slicing and gluing
−QC varies batch to batch: some users get great units, some need calibration work
−Artillery's community is thin compared to Creality or Elegoo
−Gets audibly loud pushing 500mm/s; this is a workshop printer, not a bedroom one
QIDI X-Plus 3
+60C active chamber heating is the real feature: ABS stops warping, Nylon actually sticks
+Handles PA, PC, and carbon-fiber composites without drama
+CoreXY at 600mm/s inside a heated enclosure is genuinely rare under $600
+280mm build volume is larger than most enclosed competitors at this price
−QIDI's slicer software feels like 2020: functional but not pleasant
−Community is small; problems require more DIY solving than Bambu or Creality
−Some components are proprietary, which makes upgrades harder
Who Should Buy Which?
Choose the Artillery Sidewinder X4 Plus if you want:
- A great printer for large-prints
- A great printer for budget
- A great printer for speed
- 300x300x400mm build
- Klipper
- Auto bed leveling
Choose the QIDI X-Plus 3 if you want:
- A great printer for engineering
- A great printer for abs
- A great printer for enclosed
- A great printer for speed
- Enclosed
- CoreXY
- Chamber heating (60C)
Frequently Asked Questions
Is the Artillery Sidewinder X4 Plus better than the QIDI X-Plus 3?
By the numbers, the QIDI X-Plus 3 scores higher (8.4/10). But "better" depends on your use case, the Artillery Sidewinder X4 Plus may be the smarter buy if you need large-prints.
Which is better for beginners, Artillery Sidewinder X4 Plus or QIDI X-Plus 3?
The QIDI X-Plus 3 is more beginner-friendly (7/10 vs 6/10) with easier setup and a gentler learning curve.
Is the QIDI X-Plus 3 worth $150 more than the Artillery Sidewinder X4 Plus?
The QIDI X-Plus 3 scores higher overall (8.4/10 vs 7.4/10). The extra $150 gets you 60c active chamber heating is the real feature: abs stops warping, nylon actually sticks.
What's the main difference between Artillery Sidewinder X4 Plus and QIDI X-Plus 3?
Build volume (300x300x400mm vs 280x280x270mm) and print speed (500 vs 600 mm/s). The Artillery Sidewinder X4 Plus is best for large-prints; the QIDI X-Plus 3 targets engineering.