
Bambu Lab P1S
- Speed
- 500 mm/s
- Score
- 9/10
- Wins
- 1/5
Specs from the PrintPick catalog, checked 2026-09-29. Scores are PrintPick ratings out of 10.


Buy the P2S.
9.2/10 vs P1S's 9/10, and it wins 2 of 5 categories. Best enclosed CoreXY under $600 right now. New buyers: this is the answer, skip the P1S comparison. P1S owners: the nozzle system and AMS 2 Pro drying tip the scales toward upgrading, but only if you use those features regularly.
Quick answer
The Bambu Lab P2S is the better new buy because the quick-swap nozzle, 1080p AI camera, larger touchscreen, and AMS 2 Pro support are all practical upgrades. The P1S is still worth buying only when the discount is large enough, usually refurbished or on sale.
| Difference | P1S | P2S |
|---|---|---|
| Nozzle changes | Two wrenches, hotend must be hot, a few minutes | Quick-swap, one hand, cold, under 5 seconds |
| Screen | Small non-touch display | 5-inch touchscreen, manages prints without the app |
| Camera | 720p, notification only, no AI detection | 1080p with AI failure detection, pauses the print |
| Filament system | AMS, no drying, needs a separate drybox | AMS 2 Pro, dries filament to 50C while feeding |
Teal wins the row.
| P1S | Spec | P2S |
|---|---|---|
| 16.8 L | Build volume | 16.8 L |
| 500 mm/s | Top speed | 500 mm/s |
| 0.05 mm | Finest layer | 0.05 mm |
| 14.13 kg | Weight | 14.9 kg |
| P1S | Feature | P2S |
|---|---|---|
| Yes | Enclosed | No |
| Yes | Multi-material (AMS) | No |
| Yes | WiFi | No |
| Yes | Camera | No |
| Yes | HEPA filter | No |
| Yes | Active chamber heating | No |
| No | Enclosed CoreXY | Yes |
| No | AMS 2 Pro compatible | Yes |
| No | 5-inch touchscreen | Yes |
| No | 1080p AI camera | Yes |
| No | Quick-swap nozzle system | Yes |
| No | PMSM servo extruder (8.5kg force) | Yes |
| P1S | Spec | P2S |
|---|---|---|
| 8 | Value | 9 (wins) |
| 8 | Beginner Friendliness | 9 (wins) |
| 10 | Print Quality | 10 |
| 9 | Speed | 9 |
| 10 (wins) | Reliability | 9 |
| 9 | Overall | 9.2 (wins) |
The widest gap is Value: the Bambu Lab P2S scores 9 against 8 for the Bambu Lab P1S, a 1-point lead.
The headline feature is the quick-swap nozzle system. On the P1S, changing a nozzle required heating the hotend, using two wrenches, and a few minutes of careful work. On the P2S, you pop the nozzle out with one hand in under 5 seconds, cold. This sounds minor until you realize it changes how you print: swap to a 0.2mm nozzle for detailed miniatures, then back to 0.6mm for fast functional parts, all in the same print session. The 5-inch touchscreen replaces the P1S's tiny screen and lets you manage prints without the app. The 1080p camera with AI failure detection catches spaghetti and layer shifts in real-time, pausing the print and notifying you instead of wasting hours of filament. The P1S had a camera, but it was 720p with no AI. The AMS 2 Pro (sold separately) is the other game-changer. It doubles as a filament dryer, maintaining 50C while feeding, a feature that previously required a separate drybox. For hygroscopic filaments like Nylon and PETG, this eliminates an entire step from the workflow. The enclosure now features adaptive cooling that pulls outside air for PLA or recirculates hot air for ABS, automatically adjusting based on the material profile.
The P1S isn't suddenly a bad printer, it just got outclassed. For existing P1S owners, the core printing experience is nearly identical. Same 256mm build volume, same 500mm/s speed class, same excellent print quality with PLA and PETG. The P1S's enclosure still handles ABS and ASA well. The community has had two years to dial in profiles for every filament imaginable, and the aftermarket accessories ecosystem is massive. One genuine advantage the P1S retains: price. While the P2S launched at a higher price than the P1S, the P1S is available refurbished and on sale for less. At a sale price, it remains the best enclosed printer deal in 3D printing. If you find a P1S on sale and don't need quick-swap nozzles or the AMS 2 Pro drying feature, it's still an excellent buy. The P1S also benefits from being a known quantity. Every firmware quirk has been documented. Every common issue has a community fix. The P2S is new enough that edge cases are still being discovered. For risk-averse buyers, the P1S's track record is a genuine selling point.
For new buyers: get the P2S. The extra cost over the P1S buys upgrades that are all pure upside, quick-swap nozzles, better camera, improved cooling, and the option for an AMS that dries filament. There is no reason to buy a new P1S at full price when the P2S exists. For P1S owners: the upgrade is worth it if you regularly change nozzles, want AI failure detection, or plan to buy the AMS 2 Pro for its drying capability. If you print mostly PLA with a 0.4mm nozzle and your P1S works fine, there is no urgent reason to switch, your P1S will serve you well for years to come. The P2S doesn't make the P1S obsolete for existing owners; it just makes it a harder recommendation for new buyers.
The P1S is the printer I tell people to buy when they say 'I want something that just works.'P1S owner, r/3Dprinting
Refreshing a best seller. The P1S is the strong choice for anyone wanting to print ABS without headaches.P1S owner, Tom's Hardware
The quick nozzle swap makes me jealous even as an X1C owner.P2S owner, r/BambuLab
Goldilocks gets a glow up. The P2S refreshes a best seller with meaningful upgrades.P2S owner, Tom's Hardware
For new buyers, the P2S is recommended without hesitation. Meaningfully better than the P1S in every way.P2S owner, 3DTechValley
A printer does nothing without these. Grab them in the same order.
By the numbers, the Bambu Lab P2S scores higher (9.2/10). But "better" depends on your use case, the Bambu Lab P1S may be the smarter buy if you need engineering.
The Bambu Lab P2S is more beginner-friendly (9/10 vs 8/10) with easier setup and a gentler learning curve.
The Bambu Lab P2S scores higher overall (9.2/10 vs 9/10). The extra money gets you quick-swap nozzle: no tools, no waiting for cool-down, no thread damage from hot-tightening.
Build volume (256x256x256mm vs 256x256x256mm) and print speed (500 vs 500 mm/s). The Bambu Lab P1S is best for engineering; the Bambu Lab P2S targets speed.