Creality Ender 3 V3 Plus vs QIDI X-Plus 3
Head-to-head 3D printer comparison, 2026
The Creality Ender 3 V3 Plus and QIDI X-Plus 3 are both FDM 3D printers competing in different tiers, $299 vs $499. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Creality Ender 3 V3 Plus takes the crown with 8.6/10 vs 8.4/10. It pulls ahead in Value, Beginner Friendliness. The QIDI X-Plus 3 still puts up a fight in Print Quality.
Score Breakdown
Specifications
| Spec | Creality Ender 3 V3 Plus | QIDI X-Plus 3 |
|---|---|---|
| Price | $299 | $499 |
| Type | FDM | FDM |
| Build Volume | 300 x 300 x 330 mm | 280 x 280 x 270 mm |
| Print Speed | 600 mm/s | 600 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 9.7 kg | 17 kg |
| Overall Score | 8.6/10 | 8.4/10 |
Pros & Cons
Creality Ender 3 V3 Plus
+$299 for 300×300×330mm and 600mm/s — no other printer at this price gets close on volume and speed simultaneously
+CoreXZ keeps the gantry lightweight for reliable high-speed moves
+Direct-drive Sprite extruder handles flexible filaments without a bowden gap
+Klipper-based firmware means real input shaping, not marketing figures
+PEI sheet gives excellent adhesion and clean part release
−Open-frame means ABS and ASA warping without an aftermarket enclosure
−CoreXZ means Y-axis moves the bed — large heavy prints can shift if acceleration is too high
−600mm/s is achievable but real-world quality prints run at 200-300mm/s
−Support quality from Creality varies; community forums are more reliable
QIDI X-Plus 3
+60C active chamber heating is the real feature: ABS stops warping, Nylon actually sticks
+Handles PA, PC, and carbon-fiber composites without drama
+CoreXY at 600mm/s inside a heated enclosure is genuinely rare under $600
+280mm build volume is larger than most enclosed competitors at this price
−QIDI's slicer software feels like 2020: functional but not pleasant
−Community is small; problems require more DIY solving than Bambu or Creality
−Some components are proprietary, which makes upgrades harder
Who Should Buy Which?
Choose the Creality Ender 3 V3 Plus if you want:
- A great printer for large-format
- A great printer for value
- A great printer for speed
- A great printer for beginner
- CoreXZ motion system (vs CoreXY on the K1C)
- 300×300×330mm large build volume
- 600mm/s max print speed with input shaping
Choose the QIDI X-Plus 3 if you want:
- A great printer for engineering
- A great printer for abs
- A great printer for enclosed
- A great printer for speed
- Enclosed
- CoreXY
- Chamber heating (60C)
Frequently Asked Questions
Is the Creality Ender 3 V3 Plus better than the QIDI X-Plus 3?
By the numbers, the Creality Ender 3 V3 Plus scores higher (8.6/10). But "better" depends on your use case, the QIDI X-Plus 3 may be the smarter buy if you need engineering.
Which is better for beginners, Creality Ender 3 V3 Plus or QIDI X-Plus 3?
The Creality Ender 3 V3 Plus is more beginner-friendly (8/10 vs 7/10) with easier setup and a gentler learning curve.
Is the QIDI X-Plus 3 worth $200 more than the Creality Ender 3 V3 Plus?
The Creality Ender 3 V3 Plus actually scores higher (8.6/10) despite costing $200 less. The QIDI X-Plus 3 only makes sense if you specifically need engineering.
What's the main difference between Creality Ender 3 V3 Plus and QIDI X-Plus 3?
Build volume (300x300x330mm vs 280x280x270mm) and print speed (600 vs 600 mm/s). The Creality Ender 3 V3 Plus is best for large-format; the QIDI X-Plus 3 targets engineering.