Kingroon KLP1 vs QIDI X-Plus 3
Head-to-head 3D printer comparison, 2026
The Kingroon KLP1 and QIDI X-Plus 3 are both FDM 3D printers competing in different tiers, $299 vs $499. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The QIDI X-Plus 3 takes the crown with 8.4/10 vs 7.6/10. It pulls ahead in Beginner Friendliness, Print Quality, Speed, Reliability. That said, the Kingroon KLP1 saves you $200.
Score Breakdown
Specifications
| Spec | Kingroon KLP1 | QIDI X-Plus 3 |
|---|---|---|
| Price | $299 | $499 |
| Type | FDM | FDM |
| Build Volume | 200 x 200 x 200 mm | 280 x 280 x 270 mm |
| Print Speed | 500 mm/s | 600 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 8.5 kg | 17 kg |
| Overall Score | 7.6/10 | 8.4/10 |
Pros & Cons
Kingroon KLP1
+Enclosed CoreXY with linear rails and Klipper at $299: this combination normally costs $400+
+Compact enough to fit on a shelf while still being fully enclosed
+Klipper access means you can tune everything from macros to pressure advance
+CoreXY inside an enclosure means ABS and PETG print cleanly
−200mm cube is the real limitation: larger parts need splitting
−Kingroon's community is thin: if something breaks, you're mostly solving it from Klipper docs and Reddit
−Needs calibration time out of the box before it prints well
QIDI X-Plus 3
+60C active chamber heating is the real feature: ABS stops warping, Nylon actually sticks
+Handles PA, PC, and carbon-fiber composites without drama
+CoreXY at 600mm/s inside a heated enclosure is genuinely rare under $600
+280mm build volume is larger than most enclosed competitors at this price
−QIDI's slicer software feels like 2020: functional but not pleasant
−Community is small; problems require more DIY solving than Bambu or Creality
−Some components are proprietary, which makes upgrades harder
Who Should Buy Which?
Choose the Kingroon KLP1 if you want:
- A great printer for enclosed
- A great printer for compact
- A great printer for diy
- Enclosed
- Linear rails
- CoreXY
Choose the QIDI X-Plus 3 if you want:
- A great printer for engineering
- A great printer for abs
- A great printer for enclosed
- A great printer for speed
- Enclosed
- CoreXY
- Chamber heating (60C)
Frequently Asked Questions
Is the Kingroon KLP1 better than the QIDI X-Plus 3?
By the numbers, the QIDI X-Plus 3 scores higher (8.4/10). But "better" depends on your use case, the Kingroon KLP1 may be the smarter buy if you need enclosed.
Which is better for beginners, Kingroon KLP1 or QIDI X-Plus 3?
The QIDI X-Plus 3 is more beginner-friendly (7/10 vs 6/10) with easier setup and a gentler learning curve.
Is the QIDI X-Plus 3 worth $200 more than the Kingroon KLP1?
The QIDI X-Plus 3 scores higher overall (8.4/10 vs 7.6/10). The extra $200 gets you 60c active chamber heating is the real feature: abs stops warping, nylon actually sticks.
What's the main difference between Kingroon KLP1 and QIDI X-Plus 3?
Build volume (200x200x200mm vs 280x280x270mm) and print speed (500 vs 600 mm/s). The Kingroon KLP1 is best for enclosed; the QIDI X-Plus 3 targets engineering.