Kingroon KLP1 vs Sovol SV07 Plus
Head-to-head 3D printer comparison, 2026
The Kingroon KLP1 and Sovol SV07 Plus are both FDM 3D printers competing in the same price bracket, $299 vs $339. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Kingroon KLP1 takes the crown with 7.6/10 vs 7/10. It pulls ahead in Beginner Friendliness, Print Quality, Speed.
Score Breakdown
Specifications
| Spec | Kingroon KLP1 | Sovol SV07 Plus |
|---|---|---|
| Price | $299 | $339 |
| Type | FDM | FDM |
| Build Volume | 200 x 200 x 200 mm | 300 x 300 x 350 mm |
| Print Speed | 500 mm/s | 500 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 8.5 kg | 16.5 kg |
| Overall Score | 7.6/10 | 7/10 |
Pros & Cons
Kingroon KLP1
+Enclosed CoreXY with linear rails and Klipper at $299: this combination normally costs $400+
+Compact enough to fit on a shelf while still being fully enclosed
+Klipper access means you can tune everything from macros to pressure advance
+CoreXY inside an enclosure means ABS and PETG print cleanly
−200mm cube is the real limitation: larger parts need splitting
−Kingroon's community is thin: if something breaks, you're mostly solving it from Klipper docs and Reddit
−Needs calibration time out of the box before it prints well
Sovol SV07 Plus
+300x300x350mm with Klipper for $339: larger than the Artillery Sidewinder for less money
+Pre-installed Klipper means proper input shaping at this bed size
+Direct drive at 300mm scale is a feature most competitors skip
+Sovol's Klipper configs are more complete out-of-box than most budget machines
−Out-of-box calibration takes 2-3 hours for new users: this is not plug-and-play
−Sovol community is small: you'll hit gaps in documentation when troubleshooting
−Open frame at this bed size means ABS adhesion is a real challenge
Who Should Buy Which?
Choose the Kingroon KLP1 if you want:
- A great printer for enclosed
- A great printer for compact
- A great printer for diy
- Enclosed
- Linear rails
- CoreXY
Choose the Sovol SV07 Plus if you want:
- A great printer for large-prints
- A great printer for budget
- A great printer for diy
- Klipper firmware
- Auto bed leveling
- Direct drive
Frequently Asked Questions
Is the Kingroon KLP1 better than the Sovol SV07 Plus?
By the numbers, the Kingroon KLP1 scores higher (7.6/10). But "better" depends on your use case, the Sovol SV07 Plus may be the smarter buy if you need large-prints.
Which is better for beginners, Kingroon KLP1 or Sovol SV07 Plus?
The Kingroon KLP1 is more beginner-friendly (6/10 vs 5/10) with easier setup and a gentler learning curve.
Is the Sovol SV07 Plus worth $40 more than the Kingroon KLP1?
The Kingroon KLP1 actually scores higher (7.6/10) despite costing $40 less. The Sovol SV07 Plus only makes sense if you specifically need large-prints.
What's the main difference between Kingroon KLP1 and Sovol SV07 Plus?
Build volume (200x200x200mm vs 300x300x350mm) and print speed (500 vs 500 mm/s). The Kingroon KLP1 is best for enclosed; the Sovol SV07 Plus targets large-prints.