Sovol SV07 Plus
- Speed
- 500 mm/s
- Score
- 7/10
- Wins
- 2/5
Sovol SV07 Plus vs Voxelab Aquila X2
- The Sovol SV07 Plus wins, 7 vs 6.6 out of 10.
- SV07 Plus prints 2.6× the volume (300×300×350 ÷ 220×220×250 = 2.60) for more money.
- SV07 Plus is faster, 500 vs 180 mm/s.
- Pick the Aquila X2 if your prints fit in 25 cm.
Specs from the PrintPick catalog, checked 2026-09-29. Scores are PrintPick ratings out of 10.
Voxelab Aquila X2
- Speed
- 180 mm/s
- Score
- 6.6/10
- Wins
- 1/5
The verdict
Buy the SV07 Plus.
7/10 vs Aquila X2's 6.6/10, and it wins 2 of 5 categories. Good value if large-format and Klipper are both requirements. Put the setup time in and you'll get strong results. Impatient beginners should look at the Elegoo Neptune 4 Max or Artillery Sidewinder instead.
Specs, side by side
Teal wins the row.
SV07 PlusSovol · FDM
vsAquila X2Voxelab · FDM
| SV07 Plus | Spec | Aquila X2 |
|---|---|---|
| 31.5 L (wins) | Build volume | 12.1 L |
| 500 mm/s (wins) | Top speed | 180 mm/s |
| 0.05 mm | Finest layer | 0.05 mm |
| 16.5 kg | Weight | 7.8 kg |
Features
| SV07 Plus | Feature | Aquila X2 |
|---|---|---|
| Yes | Klipper firmware | No |
| Yes | Auto bed leveling | No |
| Yes | Direct drive | No |
| Yes | 300x300mm bed | No |
| Yes | WiFi | No |
| Yes | Large build | No |
| No | Resume printing | Yes |
| No | Filament runout sensor | Yes |
| No | Glass build plate | Yes |
| No | Silent stepper drivers | Yes |
Scores out of 10
| SV07 Plus | Spec | Aquila X2 |
|---|---|---|
| 9 | Value | 9 |
| 5 | Beginner Friendliness | 7 (wins) |
| 7 (wins) | Print Quality | 6 |
| 7 (wins) | Speed | 4 |
| 7 | Reliability | 7 |
| 7 (wins) | Overall | 6.6 |
Build space, front view, to one scale
- 300 × 300 × 350 mm
- 220 × 220 × 250 mm
What owners say
300mm Klipper bed for [this price]. Sovol is quietly building great printers.
SV07 Plus owner, r/3DprintingAfter tuning, this thing prints great. Put in the setup time and you'll be rewarded.
SV07 Plus owner, Nero3D (YouTube)Solid starter printer. Not flashy, but it works and teaches you the fundamentals.
Aquila X2 owner, r/3Dprinting
Pros & Cons
SV07 Plus
- +300x300x350mm with Klipper: larger than the Artillery Sidewinder for less money
- +Pre-installed Klipper means proper input shaping at this bed size
- +Direct drive at 300mm scale is a feature most competitors skip
- −Out-of-box calibration takes 2-3 hours for new users: this is not plug-and-play
- −Sovol community is small: you'll hit gaps in documentation when troubleshooting
Aquila X2
- +Silent stepper drivers mean it runs without disturbing the room
- +Manual leveling teaches you what auto-leveling actually does
- +Ender 3-compatible mods are everywhere and cheap
- −Manual bed leveling is a chore you'll do every few prints until you upgrade it
- −Bowden extruder makes TPU printing a frustrating exercise
Buy these with it
A printer does nothing without these. Grab them in the same order.
- ELEGOO PLA filament, 1kgThe easy filament to start on. Prints at low temperatures and warps less.
- ELEGOO PETG filament, 1kgTougher and more heat tolerant than PLA, for parts that get handled or sit in the sun.
- SUNLU filament dryer S1 PlusWet filament causes stringing and rough surfaces. A dryer fixes that before you blame the printer.
Frequently Asked Questions
Is the Sovol SV07 Plus better than the Voxelab Aquila X2?
By the numbers, the Sovol SV07 Plus scores higher (7/10). But "better" depends on your use case, the Voxelab Aquila X2 may be the smarter buy if you need budget.
Which is better for beginners, Sovol SV07 Plus or Voxelab Aquila X2?
The Voxelab Aquila X2 is more beginner-friendly (7/10 vs 5/10) with easier setup and a gentler learning curve.
Is the Sovol SV07 Plus worth paying more for over the Voxelab Aquila X2?
The Sovol SV07 Plus scores higher overall (7/10 vs 6.6/10). The extra money gets you 300x300x350mm with klipper: larger than the artillery sidewinder for less money.
What's the main difference between Sovol SV07 Plus and Voxelab Aquila X2?
Build volume (300x300x350mm vs 220x220x250mm) and print speed (500 vs 180 mm/s). The Sovol SV07 Plus is best for large-prints; the Voxelab Aquila X2 targets budget.