Anycubic Kobra 3 Combo vs Elegoo Neptune 4 Max

  • Buy the Elegoo Neptune 4 Max.
  • The Anycubic Kobra 3 Combo scores higher, 8 vs 7 out of 10, but it is discontinued.

Specs from the PrintPick catalog, checked 2026-09-29. Scores are PrintPick ratings out of 10.

The verdict

Buy the Neptune 4 Max.

The Kobra 3 Combo scores higher but is discontinued. The Neptune 4 Max wins on value for large-format Klipper printing. The Artillery Sidewinder X4 is the cheaper competitor; the extra cost buys you better software support and a slightly larger build volume.

Specs, side by side

Teal wins the row.

Kobra 3 ComboAnycubic · FDM
vs
Neptune 4 MaxElegoo · FDM
Kobra 3 Combo and Neptune 4 Max compared: specs
Kobra 3 ComboSpecNeptune 4 Max
16.3 LBuild volume84.7 L (wins)
600 mm/s (wins)Top speed500 mm/s
0.05 mmFinest layer0.05 mm
10 kgWeight22 kg

Features

Features of the Kobra 3 Combo and Neptune 4 Max
Kobra 3 ComboFeatureNeptune 4 Max
YesMulti-color (ACE Pro)No
YesAuto bed levelingYes
YesWiFiNo
YesCameraNo
YesDirect driveYes
NoKlipper firmwareYes
NoPEI build plateYes
No420x420x480mm buildYes

Scores out of 10

Kobra 3 Combo and Neptune 4 Max compared: PrintPick scores out of 10
Kobra 3 ComboSpecNeptune 4 Max
8Value9 (wins)
8 (wins)Beginner Friendliness5
8 (wins)Print Quality7
9 (wins)Speed7
7Reliability7
8 (wins)Overall7

Build space, front view, to one scale

  • 250 × 250 × 260 mm
  • 420 × 420 × 480 mm

What sets these two apart

The widest gap is Beginner Friendliness: the Anycubic Kobra 3 Combo scores 8 against 5 for the Elegoo Neptune 4 Max, a 3-point lead. The Elegoo Neptune 4 Max has the larger build volume, 420 x 420 x 480mm against 250 x 250 x 260mm, or 421% more space. The Anycubic Kobra 3 Combo lists a top speed of 600 mm/s against 500 mm/s.

What owners say

  • Anycubic's answer to the A1 Combo. Competitive on paper, needs more real-world time.
    Kobra 3 Combo owner, r/3Dprinting
  • 420mm Klipper for [this price]. Elegoo just won the large format budget race.
    Neptune 4 Max owner, r/3Dprinting
  • Printed a full cosplay breastplate in one go. Absolutely remarkable value.
    Neptune 4 Max owner, r/cosplay

Pros & Cons

Kobra 3 Combo

  • +600mm/s multi-color printing at competitive pricing
  • +ACE Pro handles 4 colors with less waste than early Bambu AMS
  • +WiFi and camera are standard, not paid extras
  • −ACE Pro system is newer and less battle-tested than Bambu's AMS
  • −Anycubic software isn't as polished as Bambu Studio

Neptune 4 Max

  • +420x420x480mm with Klipper: the price-to-volume ratio is hard to beat
  • +Direct drive on a bed this large is unusual and useful for flexible materials
  • +Klipper gives you full control to tune speed and acceleration for the mass of this bed
  • −Open frame at this scale means ABS warping will ruin prints without serious prep
  • −The sheer footprint means a dedicated table minimum; don't try to share desk space

Frequently Asked Questions

Is the Anycubic Kobra 3 Combo better than the Elegoo Neptune 4 Max?

By the numbers, the Anycubic Kobra 3 Combo scores higher (8/10). But "better" depends on your use case, the Elegoo Neptune 4 Max may be the smarter buy if you need large-prints.

Which is better for beginners, Anycubic Kobra 3 Combo or Elegoo Neptune 4 Max?

The Anycubic Kobra 3 Combo is more beginner-friendly (8/10 vs 5/10) with easier setup and a gentler learning curve.

Is the Elegoo Neptune 4 Max worth paying more for over the Anycubic Kobra 3 Combo?

The Anycubic Kobra 3 Combo actually scores higher (8/10) despite costing less. The Elegoo Neptune 4 Max only makes sense if you specifically need large-prints.

What's the main difference between Anycubic Kobra 3 Combo and Elegoo Neptune 4 Max?

Build volume (250x250x260mm vs 420x420x480mm) and print speed (600 vs 500 mm/s). The Anycubic Kobra 3 Combo is best for multi-color; the Elegoo Neptune 4 Max targets large-prints.

Related Comparisons