Anycubic Kobra S1 ACE 2 Pro Combo vs Bambu Lab P2S
Head-to-head 3D printer comparison, 2026
The Anycubic Kobra S1 ACE 2 Pro Combo and Bambu Lab P2S are both FDM 3D printers competing in the same price bracket, $459 vs $549. Both are scored across value, beginner-friendliness, quality, speed, and reliability. Here's the full breakdown.
Our Verdict
The Bambu Lab P2S takes the crown with 9.2/10 vs 8/10. It pulls ahead in Beginner Friendliness, Print Quality, Reliability. That said, the Anycubic Kobra S1 ACE 2 Pro Combo saves you $90.
Direct answer
Bambu Lab P2S is the better pick for most buyers.
Choose Bambu Lab P2S if you want the stronger overall score, better fit for speed and enclosed, and the safer recommendation. Choose Anycubic Kobra S1 ACE 2 Pro Combo only if its specific strengths matter more to you than the overall result.
Winner by buyer type
Best overall
Bambu Lab P2S
Best value
Anycubic Kobra S1 ACE 2 Pro Combo
Best build volume
Bambu Lab P2S
Score Breakdown
Specifications
| Spec | Anycubic Kobra S1 ACE 2 Pro Combo | Bambu Lab P2S |
|---|---|---|
| Price | $459 | $549 |
| Type | FDM | FDM |
| Build Volume | 250 x 250 x 250 mm | 256 x 256 x 256 mm |
| Print Speed | 600 mm/s | 500 mm/s |
| Min Resolution | 0.05 mm | 0.05 mm |
| Weight | 13 kg | 14.9 kg |
| Overall Score | 8/10 | 9.2/10 |
Pros & Cons
Anycubic Kobra S1 ACE 2 Pro Combo
+16-color capable (4 colors standard; 16 colors requires 4x ACE 2 Pro units purchased separately). Doubles the 8-color S1 Combo and quadruples the Bambu A1 Combo (4)
+Fully enclosed CoreXY handles ABS, ASA, and engineering filaments without warping
+44dB quiet mode is unusually low for a 600mm/s CoreXY — apartment-friendly
+Upgraded hotend is rated for the full Anycubic filament range
+Early bird €459 undercuts the Bambu P2S (€549) and matches pricing of the older 8-color S1 Combo
−Brand new product — early adopter risk on firmware and ACE 2 Pro reliability
−Anycubic slicer still trails Bambu Studio on automation and profile polish
−ACE 2 Pro adds significant desk footprint
−Early bird pricing ends May 31 — regular price expected to climb
Bambu Lab P2S
+Quick-swap nozzle: no tools, no waiting for cool-down, no thread damage from hot-tightening
+1080p AI camera pauses the print when it detects layer failures, not just notifies you
+AMS 2 Pro dries filament while printing so you don't need a separate drybox for standard materials
+5-inch touchscreen is large enough to actually use without squinting at a 2-inch screen
−No LiDAR sensor: that capability is still exclusive to the X-series
−P1S owners have no trade-in path; the upgrade cost is the full $549
−Multi-color purges still waste filament; purge blocks help but don't fix the root issue
−The $799 Combo version gets close enough to the H2D's price that a comparison is warranted
Who Should Buy Which?
Choose the Anycubic Kobra S1 ACE 2 Pro Combo if you want:
- A great printer for multi-color
- A great printer for speed
- A great printer for enclosed
- ACE 2 Pro multi-color system (up to 16 colors)
- Fully-enclosed CoreXY architecture
- Upgraded hotend (all-filament compatible)
Choose the Bambu Lab P2S if you want:
- A great printer for speed
- A great printer for enclosed
- A great printer for multi-color
- A great printer for engineering
- Enclosed CoreXY
- AMS 2 Pro compatible
- 5-inch touchscreen
Frequently Asked Questions
Is the Anycubic Kobra S1 ACE 2 Pro Combo better than the Bambu Lab P2S?
By the numbers, the Bambu Lab P2S scores higher (9.2/10). But "better" depends on your use case, the Anycubic Kobra S1 ACE 2 Pro Combo may be the smarter buy if you need multi-color.
Which is better for beginners, Anycubic Kobra S1 ACE 2 Pro Combo or Bambu Lab P2S?
The Bambu Lab P2S is more beginner-friendly (9/10 vs 7/10) with easier setup and a gentler learning curve.
Is the Bambu Lab P2S worth $90 more than the Anycubic Kobra S1 ACE 2 Pro Combo?
The Bambu Lab P2S scores higher overall (9.2/10 vs 8/10). The extra $90 gets you quick-swap nozzle: no tools, no waiting for cool-down, no thread damage from hot-tightening.
What's the main difference between Anycubic Kobra S1 ACE 2 Pro Combo and Bambu Lab P2S?
Build volume (250x250x250mm vs 256x256x256mm) and print speed (600 vs 500 mm/s). The Anycubic Kobra S1 ACE 2 Pro Combo is best for multi-color; the Bambu Lab P2S targets speed.