
Bambu Lab P1S
- Speed
- 500 mm/s
- Score
- 9/10
- Wins
- 3/5
Specs from the PrintPick catalog, checked 2026-09-29. Scores are PrintPick ratings out of 10.


Buy the P1S.
9/10 vs SPARKX i7's 8.4/10, and it wins 3 of 5 categories. Buy this if you print ABS, ASA, or anything that smells or warps in open air. The enclosure and filtration aren't optional extras, they're the whole point. If you only print PLA, save some money and get the A1 Combo.
Teal wins the row.
| P1S | Spec | SPARKX i7 |
|---|---|---|
| 16.8 L | Build volume | 17.2 L (wins) |
| 500 mm/s | Top speed | 500 mm/s |
| 0.05 mm | Finest layer | 0.05 mm |
| 14.13 kg | Weight | 11.8 kg |
| P1S | Feature | SPARKX i7 |
|---|---|---|
| Yes | Enclosed | No |
| Yes | Multi-material (AMS) | No |
| Yes | WiFi | No |
| Yes | Camera | No |
| Yes | HEPA filter | No |
| Yes | Active chamber heating | No |
| No | CFS Lite multi-color (4 colors) | Yes |
| No | AI-assisted print monitoring | Yes |
| No | Auto bed leveling | Yes |
| No | WiFi + touchscreen | Yes |
| No | Direct drive extruder | Yes |
| No | 95% pre-assembled | Yes |
| No | Tom's Hardware CES 2026 Best 3D Printer | Yes |
| P1S | Spec | SPARKX i7 |
|---|---|---|
| 8 | Value | 9 (wins) |
| 8 | Beginner Friendliness | 9 (wins) |
| 10 (wins) | Print Quality | 8 |
| 9 (wins) | Speed | 8 |
| 10 (wins) | Reliability | 8 |
| 9 (wins) | Overall | 8.4 |
The widest gap is Print Quality: the Bambu Lab P1S scores 10 against 8 for the Creality SPARKX i7, a 2-point lead. The Creality SPARKX i7 has the larger build volume, 260 x 260 x 255mm against 256 x 256 x 256mm, or 3% more space.
The P1S is the printer I tell people to buy when they say 'I want something that just works.'P1S owner, r/3Dprinting
Refreshing a best seller. The P1S is the strong choice for anyone wanting to print ABS without headaches.P1S owner, Tom's Hardware
Tom's Hardware Best 3D Printer of CES 2026. Creality finally has a real Bambu competitor.SPARKX i7 owner, Tom's Hardware
Very beginner friendly, almost plug and play. No tuning or adjustment needed out of the box.SPARKX i7 owner, Creality Community Forum
The AI monitoring actually works. Caught a spaghetti failure at layer 12 and paused the print automatically.SPARKX i7 owner, r/Creality
When 3D printing stops feeling intimidating, that's the SparkX i7 experience.SPARKX i7 owner, The Gadgeteer
A printer does nothing without these. Grab them in the same order.
By the numbers, the Bambu Lab P1S scores higher (9/10). But "better" depends on your use case, the Creality SPARKX i7 may be the smarter buy if you need multi-color.
The Creality SPARKX i7 is more beginner-friendly (9/10 vs 8/10) with easier setup and a gentler learning curve.
The Bambu Lab P1S scores higher overall (9/10 vs 8.4/10). The extra money gets you hepa filter actually handles abs fumes, not just pla smell.
Build volume (256x256x256mm vs 260x260x255mm) and print speed (500 vs 500 mm/s). The Bambu Lab P1S is best for engineering; the Creality SPARKX i7 targets multi-color.