Community Pick
At a glance
Creality · FDM (filament)
- Score
- 8/10
- Rank
- #28/51
- Build
- 27.0 L
- Speed
- 600 mm/s
- Layer
- 0.05 mm
Buy on Amazon
Amazon sets the current price. Check it on Amazon before you buy.
Creality K1 Max
Creality K1 Max
- Scores 8 out of 10, #28 of 51 current FDM printers.
- 27.0 L of build space (300³ mm), 1.2× the 21.6 L average.
- Best at speed: 10/10, against an average of 7.9.
- The catch: Gets loud pushing near 600mm/s, noticeable in a quiet room.
Specs from the PrintPick catalog, checked 2026-09-29. Scores are PrintPick ratings out of 10.
By Shadman Rahman · Prices checked
The verdict
Buy the K1 Max. 8/10, #28 of 51 FDM printers.
If 256mm isn't enough, this is the obvious call. The AI camera is a genuine feature at this price, not a gimmick. Just make sure you have the desk space before it arrives.
Why buy the K1 Max
- #1 of 51Joint best FDM printer for speed10/10 vs 7.9/10 average
- #13 of 51Top 13 FDM printers for build space27.0 L vs 21.6 L average
- #20 of 51Top 20 FDM printers for print quality8/10 vs 8.4/10 average
The numbers behind it
Right side is the average of the 51 current FDM printers we track. Teal wins the row.
K1 MaxCreality · FDM
vsAverage51 FDM printers
| K1 Max | Spec | Average of 51 |
|---|---|---|
| 27.0 L (wins) | Build volume | 21.6 L |
| 600 mm/s (wins) | Top speed | 476 mm/s |
| 0.05 mm (wins) | Finest layer | 0.054 mm |
| 18.0 kg | Weight | 14.7 kg |
Scores out of 10
| K1 Max | Spec | Average of 51 |
|---|---|---|
| 8 | Value | 8.5 (wins) |
| 7 | Beginner | 7.4 (wins) |
| 8 | Print quality | 8.4 (wins) |
| 10 (wins) | Speed | 7.9 |
| 7 | Reliability | 8.1 (wins) |
| 8 | Overall | 8.1 (wins) |
Build space, front view, to one scale
- 300 × 300 × 300 mmK1 Max
- 450 × 450 × 470 mmCR-M4, largest current FDM
What owners say
Printed a full Mandalorian helmet in one piece. This thing is a beast.
r/3DprintingA fully enclosed Core XY powerhouse machine at an incredible price.
3DPrintBeginner
Pros & Cons
Pros
- +300mm cube enclosed: print a Mandalorian helmet without splitting it
- +600mm/s speed means the size doesn't slow you down as much as you'd expect
- +AI camera catches spaghetti before it ruins a 6-hour print
- +Creality's community already has calibration guides for everything
Cons
- −Gets loud pushing near 600mm/s, noticeable in a quiet room
- −Early firmware had issues; patch it before you do anything else
- −38cm footprint needs a proper desk, not a side table
Full specs
| Build volume | 300 × 300 × 300 mm |
|---|---|
| Layer resolution | 0.05 to 0.35 mm |
| Top speed | 600 mm/s |
| Weight | 18 kg |
| Type | FDM (filament) |
Features
- Large build volume
- AI camera
- Auto bed leveling
- Direct drive
- WiFi
Buy these with it
A printer does nothing without these. Grab them in the same order.
- ELEGOO PLA filament, 1kgThe easy filament to start on. Prints at low temperatures and warps less.
- ELEGOO PETG filament, 1kgTougher and more heat tolerant than PLA, for parts that get handled or sit in the sun.
- SUNLU filament dryer S1 PlusWet filament causes stringing and rough surfaces. A dryer fixes that before you blame the printer.
In our guides (4)
Where the K1 Max makes the cut, and what it beats.
Compare the K1 Max with (15)
- K1 Max vs Anycubic Kobra S1 ACE 2 Pro Combo
- K1 Max vs Bambu Lab A1
- K1 Max vs Bambu Lab A1 Combo
- K1 Max vs Bambu Lab A1 Mini
- K1 Max vs Bambu Lab H2D
- K1 Max vs Bambu Lab P1S
- K1 Max vs Bambu Lab P2S
- K1 Max vs Bambu Lab X2D
- K1 Max vs Creality K1
- K1 Max vs Creality SPARKX i7
- K1 Max vs Elegoo Centauri Carbon
- K1 Max vs Prusa MK4S
- K1 Max vs Qidi Q2
- K1 Max vs Sovol SV08
- K1 Max vs Voxelab Aquila X2
Frequently Asked Questions
What is the build volume of the Creality K1 Max?
The Creality K1 Max has a build volume of 300 x 300 x 300 mm.
Is the Creality K1 Max good for beginners?
The Creality K1 Max scores 7/10 for beginner-friendliness. It's a great choice for beginners.
What are the pros and cons of the Creality K1 Max?
Pros: 300mm cube enclosed: print a Mandalorian helmet without splitting it. 600mm/s speed means the size doesn't slow you down as much as you'd expect. AI camera catches spaghetti before it ruins a 6-hour print. Creality's community already has calibration guides for everything. Cons: Gets loud pushing near 600mm/s, noticeable in a quiet room. Early firmware had issues; patch it before you do anything else. 38cm footprint needs a proper desk, not a side table.
Also worth considering
fdmBambu Lab A1 Combo
Bambu Lab
9.2/10
Reddit Favorite
Multi-color printing out of the box, reliable enough for beginners, fast enough for anyone who's tired of watching a print head crawl.
Build
256mm
Speed
500mm/s
Layer
0.05mm
fdmBambu Lab A1
Bambu Lab
9.2/10
Best First Printer
The A1 without the AMS Lite. Full 256mm bed, full Bambu quality, single-color only.
Build
256mm
Speed
500mm/s
Layer
0.05mm
